[Asterisk-Users] Re: zaptel configuration

[Imran Akbar]

Asalamualaikum Atif,
    i saw your guy's ad in spider magazine.  sounds cool... yeah, i got 
asterisk to work, i had to build zaptel before asterisk.  just trying to 
transfer from one line to another now...

thanks
Imran

Atif Rasheed wrote:

>well Imran, I am not a guru of Asterisk, but I think my suggestions
>might work,
>
>  
>
>>Hi,
>>    I've been trying to get my zaptel x100p cards working for the past 
>>week now.  this is what I've done:
>>    
>>
>
>first, this should have been done with Zaptel, not asterisk
>install Zaptel, like this:
>make clean
>make linux26 (if kernel version is 2.6 or above, else do 'make' only)
>make install
>
>  
>
>>installed asterisk:
>>make clean
>>make linux 26 (for fedora core 2)
>>make install
>>    
>>
>
>and, this should have been done for Asterisk
>i.e. install Asterisk, like:
>make clean
>make
>make install
>
>  
>
>>installed zaptel:
>>make clean
>>make
>>make install
>>    
>>
>
>then do 'modprobe's', 
>'ztcfg -vvvvv', and then do 
>'asterisk -vvvvvvvvvvc'
>then check for errors, if any
>
>  
>
>>did a modprobe zaptel, and wcfxo
>>got this in /var/log/messages:
>>PCI: found IRQ 11 for device 0000:00:0f.0
>>wcfxo: daa mode is 'FCC'
>>found a wildcard fxo: wildcard x101p
>>...
>>
>>in zaptel.conf:
>>fxsks=1-2
>>
>>in zapata.conf:
>>signalling = fxs_ks
>>channel => 1
>>channel => 2
>>
>>yet when i run asterisk, the zap show channels command doesn't work.  in 
>>a previous thread they mentioned this is because some chan_zap.so file 
>>isn't loaded because of the zaptel installation.  I was told I had to 
>>REINSTALL asterisk after the zaptel stuff, which again didn't do 
>>anything.  How can this be so hard to even get installed?
>>
>>Thanks,
>>Imran
>>    
>>
>
>hope, it will work this time.
>
>  
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040831/181d0e1c/attachment.htm