[Asterisk-Users] TDM400P Problems

Lyle Giese lyle at lcrcomputer.net
Thu Aug 26 19:12:44 MST 2004


My guess is that you have PCI bus compatibility problems of some sort.
Moving the cards around may help.  Using a plug in NIC may help.  A
different Motherboard may help.

This looks like hardware and trial and error and experience is all you have
to lead you forward, if my guess is right.

Lyle

----- Original Message ----- 
From: "Greg Hulands" <ghulands at framedphotographics.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, August 26, 2004 8:11 PM
Subject: Re: [Asterisk-Users] TDM400P Problems


> When I did the lspci -v when it got to the tdm400p it seemed to go into
> an infinite loop on this line:
> Capabilities: [80] #00 [0000]. When I redirected output to a file it
> filled to 8MB in about 3 seconds with this line.
> I moved the NIC so that it would be before the tdm400p, but it still
> did the same thing.
>
> I haven't a clue what is going on here.
>
> Any help is greatly appreciated.
>
> Regards,
> Greg
>
> Here is the output:
>
> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
> version?) (rev c1)
> Flags: bus master, 66Mhz, fast devsel, latency 0
> Memory at d0000000 (32-bit, prefetchable)
> Capabilities: [40] AGP version 2.0
> Capabilities: [60] #08 [2001]
>
> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev
> c1)
> Subsystem: Unknown device 17f2:3401
> Flags: 66Mhz, fast devsel
>
> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev
> c1)
> Subsystem: Unknown device 17f2:3401
> Flags: 66Mhz, fast devsel
>
> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev
> c1)
> Subsystem: Unknown device 17f2:3401
> Flags: 66Mhz, fast devsel
>
> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev
> c1)
> Subsystem: Unknown device 17f2:3401
> Flags: 66Mhz, fast devsel
>
> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev
> c1)
> Subsystem: Unknown device 17f2:3401
> Flags: 66Mhz, fast devsel
>
> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
> Subsystem: Unknown device 17f2:3401
> Flags: bus master, 66Mhz, fast devsel, latency 0
> Capabilities: [48] #08 [01e1]
>
> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
> Subsystem: Unknown device 17f2:3401
> Flags: 66Mhz, fast devsel, IRQ 12
> I/O ports at bc00
> Capabilities: [44] Power Management version 2
>
> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> a4) (prog-if 10 [OHCI])
> Subsystem: Unknown device 17f2:3401
> Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
> Memory at e4002000 (32-bit, non-prefetchable)
> Capabilities: [44] Power Management version 2
>
> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> a4) (prog-if 10 [OHCI])
> Subsystem: Unknown device 17f2:3401
> Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 9
> Memory at e4003000 (32-bit, non-prefetchable)
> Capabilities: [44] Power Management version 2
>
> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> a4) (prog-if 20 [EHCI])
> Subsystem: Unknown device 17f2:3401
> Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5
> Memory at e4004000 (32-bit, non-prefetchable)
> Capabilities: [44] #0a [2080]
> Capabilities: [80] Power Management version 2
>
> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
> Audio Controler (MCP) (rev a1)
> Subsystem: Unknown device 17f2:3401
> Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 12
> I/O ports at c000
> I/O ports at b000 [size=128]
> Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
>
> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev
> a3) (prog-if 00 [Normal decode])
> Flags: bus master, 66Mhz, fast devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: e2000000-e3ffffff
> Expansion ROM at 00009000 [disabled] [size=4K]
>
> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if
> 8a [Master SecP PriP])
> Subsystem: Unknown device 17f2:3401
> Flags: bus master, 66Mhz, fast devsel, latency 0
> I/O ports at f000 [size=16]
> Capabilities: [44] Power Management version 2
>
> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00
> [Normal decode])
> Flags: bus master, 66Mhz, medium devsel, latency 32
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: e0000000-e1ffffff
> Prefetchable memory behind bridge: d8000000-dfffffff
> Expansion ROM at 0000a000 [disabled] [size=4K]
>
> 01:07.0 Network controller: Individual Computers - Jens Schoenfeld
> Intel 537 (prog-if 80)
> Subsystem: Unknown device b100:0001
> Flags: bus master, medium devsel, latency 160, IRQ 10
> I/O ports at 9000
> Memory at e3009000 (32-bit, non-prefetchable) [size=4K]
> Memory at <ignored> (32-bit, non-prefetchable)
> Memory at <ignored> (32-bit, non-prefetchable)
> Memory at <ignored> (32-bit, non-prefetchable)
> Memory at <ignored> (32-bit, non-prefetchable)
> Capabilities: [40] Power Management version 2
> Capabilities: [80] #00 [0000]
> Capabilities: [80] #00 [0000]
> Capabilities: [80] #00 [0000]
> Capabilities: [80] #00 [0000]
> Capabilities: [80] #00 [0000]
> Capabilities: [80] #00 [0000]
>
> On 27/08/2004, at 10:30 AM, Lyle Giese wrote:
>
> > lspci -v should show more helpfull info, including I/O memory
> > addresses.
> >
> > Lyle
> > ----- Original Message -----
> > From: "Greg Hulands" <ghulands at framedphotographics.com>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Thursday, August 26, 2004 7:11 PM
> > Subject: [Asterisk-Users] TDM400P Problems
> >
> >
> >> Hi,
> >> I have just started to setup and configure my asterisk box and am
> >> having trouble with it. I have a dlink nic in the box as well as the
> >> digium card. When the nic is in there by itself it works, but when I
> >> put the tdm400p in, there seems to be some sort of conflict with the
> >> network card. The tdm appears as another type of network card, which I
> >> don't think it should, should it? It shows up in lspci as 01:08.0
> >> Network controller: Individual Computers - Jens Schoenfeld Intel 537.
> >>
> >> Does anyone know why this would be happening?
> >>
> >> Any help is greatly appreciated.
> >>
> >> Regards,
> >> Greg
> >>
> >> lspci with only network card in.
> >>
> >> [root at localhost root]# lspci
> >> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
> >> version?) (rev c1)
> >> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
> >> (rev
> >> c1)
> >> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
> >> (rev
> >> c1)
> >> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
> >> (rev
> >> c1)
> >> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
> >> (rev
> >> c1)
> >> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
> >> (rev
> >> c1)
> >> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
> >> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
> >> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> >> a4)
> >> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> >> a4)
> >> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> >> a4)
> >> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
> >> Audio Controler (MCP) (rev a1)
> >> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
> >> (rev
> >> a3)
> >> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
> >> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
> >> 01:0a.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine]
> >> (rev 06)
> >> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100
> >> QY
> >> [Radeon 7000/VE]
> >> [root at localhost root]# cat /proc/interrupts
> >>             CPU0
> >>    0:     324262          XT-PIC  timer
> >>    1:         76          XT-PIC  i8042
> >>    2:          0          XT-PIC  cascade
> >>    5:          0          XT-PIC  NVidia nForce2
> >>    8:          1          XT-PIC  rtc
> >>    9:          0          XT-PIC  acpi, ehci_hcd
> >>   11:       1025          XT-PIC  ohci_hcd, eth0
> >>   12:      26249          XT-PIC  ohci_hcd, radeon at PCI:2:0:0
> >>   14:      14408          XT-PIC  ide0
> >> NMI:          0
> >> ERR:          0
> >> [root at localhost root]#
> >>
> >> lspci with network card and tdm400p in
> >>
> >> [root at localhost root]# lspci
> >> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
> >> version?) (rev c1)
> >> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
> >> (rev
> >> c1)
> >> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
> >> (rev
> >> c1)
> >> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
> >> (rev
> >> c1)
> >> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
> >> (rev
> >> c1)
> >> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
> >> (rev
> >> c1)
> >> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
> >> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
> >> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> >> a4)
> >> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> >> a4)
> >> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> >> a4)
> >> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
> >> Audio Controler (MCP) (rev a1)
> >> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
> >> (rev
> >> a3)
> >> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
> >> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
> >> 01:08.0 Network controller: Individual Computers - Jens Schoenfeld
> >> Intel 537
> >> 01:0a.0 Ethernet controller: Unknown device 9106:3043 (rev 06)
> >> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100
> >> QY
> >> [Radeon 7000/VE]
> >> [root at localhost root]# cat /proc/interrupts
> >>             CPU0
> >>    0:     566133          XT-PIC  timer
> >>    1:        141          XT-PIC  i8042
> >>    2:          0          XT-PIC  cascade
> >>    5:          0          XT-PIC  ehci_hcd
> >>    8:          1          XT-PIC  rtc
> >>    9:       2730          XT-PIC  acpi, ohci_hcd
> >>   11:      46773          XT-PIC  ohci_hcd, radeon at PCI:2:0:0
> >>   12:          0          XT-PIC  NVidia nForce2
> >>   14:      16583          XT-PIC  ide0
> >> NMI:          0
> >> ERR:         18
> >>
> >> _______________________________________________
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>




More information about the asterisk-users mailing list