[Asterisk-Users] TDM400P Problems
Greg Hulands
ghulands at framedphotographics.com
Thu Aug 26 18:11:40 MST 2004
When I did the lspci -v when it got to the tdm400p it seemed to go into
an infinite loop on this line:
Capabilities: [80] #00 [0000]. When I redirected output to a file it
filled to 8MB in about 3 seconds with this line.
I moved the NIC so that it would be before the tdm400p, but it still
did the same thing.
I haven't a clue what is going on here.
Any help is greatly appreciated.
Regards,
Greg
Here is the output:
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
Flags: bus master, 66Mhz, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable)
Capabilities: [40] AGP version 2.0
Capabilities: [60] #08 [2001]
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev
c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev
c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev
c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev
c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev
c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0
Capabilities: [48] #08 [01e1]
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel, IRQ 12
I/O ports at bc00
Capabilities: [44] Power Management version 2
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 10 [OHCI])
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
Memory at e4002000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 10 [OHCI])
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 9
Memory at e4003000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 20 [EHCI])
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5
Memory at e4004000 (32-bit, non-prefetchable)
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
Audio Controler (MCP) (rev a1)
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 12
I/O ports at c000
I/O ports at b000 [size=128]
Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev
a3) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e2000000-e3ffffff
Expansion ROM at 00009000 [disabled] [size=4K]
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if
8a [Master SecP PriP])
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00
[Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Expansion ROM at 0000a000 [disabled] [size=4K]
01:07.0 Network controller: Individual Computers - Jens Schoenfeld
Intel 537 (prog-if 80)
Subsystem: Unknown device b100:0001
Flags: bus master, medium devsel, latency 160, IRQ 10
I/O ports at 9000
Memory at e3009000 (32-bit, non-prefetchable) [size=4K]
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
On 27/08/2004, at 10:30 AM, Lyle Giese wrote:
> lspci -v should show more helpfull info, including I/O memory
> addresses.
>
> Lyle
> ----- Original Message -----
> From: "Greg Hulands" <ghulands at framedphotographics.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Thursday, August 26, 2004 7:11 PM
> Subject: [Asterisk-Users] TDM400P Problems
>
>
>> Hi,
>> I have just started to setup and configure my asterisk box and am
>> having trouble with it. I have a dlink nic in the box as well as the
>> digium card. When the nic is in there by itself it works, but when I
>> put the tdm400p in, there seems to be some sort of conflict with the
>> network card. The tdm appears as another type of network card, which I
>> don't think it should, should it? It shows up in lspci as 01:08.0
>> Network controller: Individual Computers - Jens Schoenfeld Intel 537.
>>
>> Does anyone know why this would be happening?
>>
>> Any help is greatly appreciated.
>>
>> Regards,
>> Greg
>>
>> lspci with only network card in.
>>
>> [root at localhost root]# lspci
>> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
>> version?) (rev c1)
>> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
>> (rev
>> c1)
>> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
>> (rev
>> c1)
>> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
>> (rev
>> c1)
>> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
>> (rev
>> c1)
>> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
>> (rev
>> c1)
>> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
>> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
>> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
>> a4)
>> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
>> a4)
>> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
>> a4)
>> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
>> Audio Controler (MCP) (rev a1)
>> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
>> (rev
>> a3)
>> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
>> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
>> 01:0a.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine]
>> (rev 06)
>> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100
>> QY
>> [Radeon 7000/VE]
>> [root at localhost root]# cat /proc/interrupts
>> CPU0
>> 0: 324262 XT-PIC timer
>> 1: 76 XT-PIC i8042
>> 2: 0 XT-PIC cascade
>> 5: 0 XT-PIC NVidia nForce2
>> 8: 1 XT-PIC rtc
>> 9: 0 XT-PIC acpi, ehci_hcd
>> 11: 1025 XT-PIC ohci_hcd, eth0
>> 12: 26249 XT-PIC ohci_hcd, radeon at PCI:2:0:0
>> 14: 14408 XT-PIC ide0
>> NMI: 0
>> ERR: 0
>> [root at localhost root]#
>>
>> lspci with network card and tdm400p in
>>
>> [root at localhost root]# lspci
>> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
>> version?) (rev c1)
>> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
>> (rev
>> c1)
>> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
>> (rev
>> c1)
>> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
>> (rev
>> c1)
>> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
>> (rev
>> c1)
>> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
>> (rev
>> c1)
>> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
>> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
>> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
>> a4)
>> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
>> a4)
>> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
>> a4)
>> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
>> Audio Controler (MCP) (rev a1)
>> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
>> (rev
>> a3)
>> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
>> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
>> 01:08.0 Network controller: Individual Computers - Jens Schoenfeld
>> Intel 537
>> 01:0a.0 Ethernet controller: Unknown device 9106:3043 (rev 06)
>> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100
>> QY
>> [Radeon 7000/VE]
>> [root at localhost root]# cat /proc/interrupts
>> CPU0
>> 0: 566133 XT-PIC timer
>> 1: 141 XT-PIC i8042
>> 2: 0 XT-PIC cascade
>> 5: 0 XT-PIC ehci_hcd
>> 8: 1 XT-PIC rtc
>> 9: 2730 XT-PIC acpi, ohci_hcd
>> 11: 46773 XT-PIC ohci_hcd, radeon at PCI:2:0:0
>> 12: 0 XT-PIC NVidia nForce2
>> 14: 16583 XT-PIC ide0
>> NMI: 0
>> ERR: 18
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list