[Asterisk-Users] spandsp and certain (e.g. Canon) fax machines

[reseaux]

Dear Steve
	i use Mandrake 9.2 with libaudiofile0-devel-0.2.3-6mdk 
libaudiofile0-0.2.3-6mdk do you think is correct version?
After that message Asterisk crash..
Thanks
Dimitri

On Thursday 26 August 2004 13:33, Steve Underwood wrote:
> Hi,
>
> The following part of your log:
>
> Fast carrier up
> Ouch ... error while writing audio data: : Broken pipe
> Ouch ... error while writing audio data: : Broken pipe
> Floating point exception
>
> would seem to indicate some problem with the libaudiofile on your
> machine. I guess libaudiofile must be installed, or you wouldn't even
> get that stuff in the log.
>
> Regards,
> Steve
>
> reseaux wrote:
> >Dear Steve
> >	thanks for help, i now trace the log but no audio in /tmp
> >-------------
> >    -- Starting simple switch on 'Zap/35-1'
> >    -- Executing RxFAX("Zap/35-1", "/home/user/testfax.tif") in new stack
> >Changed from phase 0 to 1
> >Slow carrier up
> >Slow carrier down
> >Slow carrier up
> >Slow carrier down
> >Start receiving document
> >Changed from phase 1 to 4
> >Sending ident
> >
> >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> >
> >DIS:
> >Preferred octets: 256
> >Can receive fax
> >Supported data signalling rates: V.27ter and V.29
> >R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >2D coding OK
> >Scan line length: 215mm
> >Recording length: A4 (297mm)
> >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> >R8x15.4lines/mm OK
> >Minimum scan line time for higher resolutions: T15.4 = T7.7
> >
> >>>>DIS: 80 00 ce f0 80 80 01
> >
> >    -- Remote UNIX connection
> >    -- Remote UNIX connection disconnected
> >HDLC underflow in state 9
> >Changed from phase 4 to 3
> >T4 timeout in state 9
> >Changed from phase 3 to 4
> >Sending ident
> >
> >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> >
> >DIS:
> >Preferred octets: 256
> >Can receive fax
> >Supported data signalling rates: V.27ter and V.29
> >R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >2D coding OK
> >Scan line length: 215mm
> >Recording length: A4 (297mm)
> >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> >R8x15.4lines/mm OK
> >Minimum scan line time for higher resolutions: T15.4 = T7.7
> >
> >>>>DIS: 80 00 ce f0 80 80 01
> >
> >T2 timeout
> >Start receiving document
> >Sending ident
> >
> >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> >
> >DIS:
> >Preferred octets: 256
> >Can receive fax
> >Supported data signalling rates: V.27ter and V.29
> >R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >2D coding OK
> >Scan line length: 215mm
> >Recording length: A4 (297mm)
> >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> >R8x15.4lines/mm OK
> >Minimum scan line time for higher resolutions: T15.4 = T7.7
> >
> >>>>DIS: 80 00 ce f0 80 80 01
> >
> >HDLC underflow in state 9
> >Changed from phase 4 to 3
> >T4 timeout in state 9
> >Changed from phase 3 to 4
> >Sending ident
> >
> >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> >
> >DIS:
> >Preferred octets: 256
> >Can receive fax
> >Supported data signalling rates: V.27ter and V.29
> >R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >2D coding OK
> >Scan line length: 215mm
> >Recording length: A4 (297mm)
> >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> >R8x15.4lines/mm OK
> >Minimum scan line time for higher resolutions: T15.4 = T7.7
> >
> >>>>DIS: 80 00 ce f0 80 80 01
> >
> >T2 timeout
> >Start receiving document
> >Sending ident
> >
> >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> >
> >DIS:
> >Preferred octets: 256
> >Can receive fax
> >Supported data signalling rates: V.27ter and V.29
> >R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >2D coding OK
> >Scan line length: 215mm
> >Recording length: A4 (297mm)
> >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> >R8x15.4lines/mm OK
> >Minimum scan line time for higher resolutions: T15.4 = T7.7
> >
> >>>>DIS: 80 00 ce f0 80 80 01
> >
> >HDLC underflow in state 9
> >Changed from phase 4 to 3
> >T2 timeout
> >Start receiving document
> >Changed from phase 3 to 4
> >Sending ident
> >
> >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> >
> >DIS:
> >Preferred octets: 256
> >Can receive fax
> >Supported data signalling rates: V.27ter and V.29
> >R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >2D coding OK
> >Scan line length: 215mm
> >Recording length: A4 (297mm)
> >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> >R8x15.4lines/mm OK
> >Minimum scan line time for higher resolutions: T15.4 = T7.7
> >
> >>>>DIS: 80 00 ce f0 80 80 01
> >
> >T4 timeout in state 9
> >Sending ident
> >
> >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> >
> >DIS:
> >Preferred octets: 256
> >Can receive fax
> >Supported data signalling rates: V.27ter and V.29
> >R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >2D coding OK
> >Scan line length: 215mm
> >Recording length: A4 (297mm)
> >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> >R8x15.4lines/mm OK
> >Minimum scan line time for higher resolutions: T15.4 = T7.7
> >
> >>>>DIS: 80 00 ce f0 80 80 01
> >
> >HDLC underflow in state 9
> >Changed from phase 4 to 3
> >Slow carrier up
> ><<< TSI: 43 37 30 38 30 35 33 31 33 33 30 20 20 20 20 20 20 20 20 20 20
> >TSI without final frame tag
> >Remote fax gave TSI as: "0331350807"
> ><<< DCS: 83 00 86 a0 00
> >DCS with final frame tag
> >In state 9
> >DCS:
> >Can receive fax
> >Selected data signalling rate: V.29, 9600bps
> >2D coding OK
> >Scan line length: 215mm
> >Recording length: A4 (297mm)
> >Minimum scan line time: 10ms
> >Get at 9600
> >Changed from phase 3 to 5
> >Fast carrier up
> >Ouch ... error while writing audio data: : Broken pipe
> >Ouch ... error while writing audio data: : Broken pipe
> >Floating point exception
> >----------
> >Thanks in adavance
> >Dimitri
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users