[Asterisk-Users] spandsp and certain (e.g. Canon) fax machines

reseaux reseauxit at yahoo.it
Thu Aug 26 04:11:37 MST 2004 

Dear Steve
	thanks for help, i now trace the log but no audio in /tmp
-------------
    -- Starting simple switch on 'Zap/35-1'
    -- Executing RxFAX("Zap/35-1", "/home/user/testfax.tif") in new stack
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Start receiving document
Changed from phase 1 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
    -- Remote UNIX connection
    -- Remote UNIX connection disconnected
HDLC underflow in state 9
Changed from phase 4 to 3
T4 timeout in state 9
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
T2 timeout
Start receiving document
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T4 timeout in state 9
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
T2 timeout
Start receiving document
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
<<< TSI: 43 37 30 38 30 35 33 31 33 33 30 20 20 20 20 20 20 20 20 20 20
TSI without final frame tag
Remote fax gave TSI as: "0331350807"
<<< DCS: 83 00 86 a0 00
DCS with final frame tag
In state 9
DCS:
Can receive fax
Selected data signalling rate: V.29, 9600bps
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 10ms
Get at 9600
Changed from phase 3 to 5
Fast carrier up
Ouch ... error while writing audio data: : Broken pipe
Ouch ... error while writing audio data: : Broken pipe
Floating point exception
----------
Thanks in adavance
Dimitri

On Thursday 26 August 2004 12:24, Steve Underwood wrote:
> Hi,
>
> If that is what you are running, you should be getting audio log files.
> The have names like /tmp/fax-rx-audio-<date> and
> /tmp/fax-tx-audio-<date>. I need a matching pair and the console log for
> investigation.
>
> Regards,
> Steve
>
> reseaux wrote:
> >Dear Steve
> >	the first line of t30.c is
> >-------------
> >#define LOG_FAX_AUDIO
> >/*
> > * SpanDSP - a series of DSP components for telephony
> > *
> > * t30.c - ITU T.30 FAX transfer processing
> > *
> > * Written by Steve Underwood <steveu at coppice.org>
> > *
> > * Copyright (C) 2003 Steve Underwood
> > *
> >----------
> >I think is right uncomment but i dont see ant audio log under /tmp, do you
> >think is possible no audio log?
> >Thanks in advance
> >Dimitri
> >
> >On Thursday 26 August 2004 06:15, Steve Underwood wrote:
> >>Hi,
> >>
> >>You are trying to receive from a Canon FAX machine. The problem I hope
> >>the change will fix is in sending *to* a Canon FAX machine. The user who
> >>found the bug in spandsp was trying to send to a Philips FAX machine.
> >>During negotiation the Philips sent a disconnect message, which is the
> >>same problem some people have with some Canon machines.
> >>
> >>It is not clear from your log why you have problems training the V.29
> >>modem. Can you enable logging, by uncommenting the first line in t30.c,
> >>and send me the audio log files you will get in your /tmp directory.
> >>
> >>Regards,
> >>Steve
> >>
> >>reseaux wrote:
> >>>Dear Steve
> >>>       i have try the SpanDSP (ver.k and latest Asterisk cvs) with the
> >>>mod you have
> >>>write below, but nothing my Canon Fax still dont send the fax:
> >>>-----
> >>>   -- Executing RxFAX("Zap/35-1", "/home/user/testfax.tif") in new stack
> >>>Changed from phase 0 to 1
> >>>Slow carrier up
> >>>Slow carrier down
> >>>Slow carrier up
> >>>Slow carrier down
> >>>Start receiving document
> >>>Changed from phase 1 to 4
> >>>Sending ident
> >>>
> >>>>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> >>>
> >>>DIS:
> >>>Preferred octets: 256
> >>>Can receive fax
> >>>Supported data signalling rates: V.27ter and V.29
> >>>R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >>>2D coding OK
> >>>Scan line length: 215mm
> >>>Recording length: A4 (297mm)
> >>>Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> >>>R8x15.4lines/mm OK
> >>>Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>>
> >>>>>>DIS: 80 00 ce f0 80 80 01
> >>>
> >>>HDLC underflow in state 9
> >>>Changed from phase 4 to 3
> >>>Slow carrier up
> >>><<< TSI: 43 37 30 38 30 35 33 31 33 33 30 20 20 20 20 20 20 20 20 20 20
> >>>TSI without final frame tag
> >>>Remote fax gave TSI as: "0331350807"
> >>><<< DCS: 83 00 86 a0 00
> >>>DCS with final frame tag
> >>>In state 9
> >>>DCS:
> >>>Can receive fax
> >>>Selected data signalling rate: V.29, 9600bps
> >>>2D coding OK
> >>>Scan line length: 215mm
> >>>Recording length: A4 (297mm)
> >>>Minimum scan line time: 10ms
> >>>Get at 9600
> >>>Changed from phase 3 to 5
> >>>Fast carrier up
> >>>Coarse carrier frequency 1728.81 (11)
> >>>Fast carrier down
> >>>Fast carrier up
> >>>Coarse carrier frequency 1699.38 (86)
> >>>Fast carrier training failed
> >>>Fast carrier down
> >>>Fast carrier up
> >>>Coarse carrier frequency 1700.06 (4917)
> >>>Fast carrier down
> >>>Fast carrier up
> >>>Coarse carrier frequency 1699.33 (86)
> >>>Fast carrier training failed
> >>>Fast carrier down
> >>>Fast carrier up
> >>>Coarse carrier 1700.09 (4915)
> >>>Fast carrier down
> >>>Fast carrier up
> >>>Coarse carrier frequency 1699.33 (86)
> >>>Fast carrier training failed
> >>>Fast carrier down
> >>>Fast carrier up
> >>>Coarse carrier frequency 1700.07 (2924)
> >>>Fast carrier down
> >>>   -- Executing NoOp("Zap/35-1", "DIALEDTIME=") in new stack
> >>>   -- Executing NoOp("Zap/35-1", "ANSWEREDTIME=") in new stack
> >>>   -- Executing Hangup("Zap/35-1", "") in new stack
> >>>----
> >>>
> >>>I dont know how to debug more, you can give more help to trace the
> >>>problem? Thanks in advance.
> >>>Dimitri
> >>>
> >>>On Wednesday 25 August 2004 11:34, Steve Underwood wrote:
> >>>>Hi,
> >>>>
> >>>>Several people have reported problems sending faxes from spandsp-0.0.1k
> >>>>to Canon FAX machines. A spandsp user had the same problem with another
> >>>>make of FAX machine, and traced the problem to a bug in the file t30.c
> >>>>of spandsp. Line 542 says s->t4.rx_file[0] where it should say
> >>>>s->t4.tx_file[0]. This fixes his problem, and I suspect it will also
> >>>> fix the Canon fax machine problem. Can someone having problems with
> >>>> Canon machines try this change, and tell me the result?
> >>>>
> >>>>Regards,
> >>>>Steve
> >>>>
> >>>>_______________________________________________
> >>>>Asterisk-Users mailing list
> >>>>Asterisk-Users at lists.digium.com
> >>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>To UNSUBSCRIBE or update options visit:
> >>>>  http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>
> >>>_______________________________________________
> >>>Asterisk-Users mailing list
> >>>Asterisk-Users at lists.digium.com
> >>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>To UNSUBSCRIBE or update options visit:
> >>>  http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>Asterisk-Users at lists.digium.com
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

More information about the asterisk-users mailing list