[Asterisk-Users] Restart Digium Cards

[Joseph]

On Wed, 2004-08-18 at 15:51, Kanwar Ranbir Sandhu wrote:
> On Wed, 2004-08-18 at 15:38, Martin Keding wrote:
> > I have a X100p and a TDM400P card in a Redhat 9 server. If Asterisk is
> > not suhtdown properly (reboot without stopping Asterisk or power
> > failure etc), I have to do a modprobe command after the restart before
> > Asterisk works again. Any ideas how to resolve this. 
> 
> That's an easy one, and I am sure it's in the wiki or in the list,
> somewhere.  However if others are wondering, here's the solution: in
> /etc/rc.modules, type in the modprobe command you use to manually load
> the modules.  That's it!  
> 
> Next time the server reboots, the rc.modules file will be read and the
> modules will be automatically loaded.
> 

Or from the folder /usr/src/zaptel
just do "make config" and it addes a service that will load all the
needed modules.

Also you can than do service zaptel restart 
etc.

-- 
respectfully, Joseph ===============
---------------------= **********  =