[Asterisk-Users] Asterisk as SMS Service Center

[administrator tootai]

Simone Ricci a écrit :

> I've found app_sms which is supposed to do that. However, I never 
> managed to get it work. Every phone I tried refuses to communicate 
> with asterisk.
>
> This was my (very basic)config:
>
> exten => 1,1,Answer
> exten => 1,2,Wait(1)
> exten => 1,3,SMS(test,as)
> exten => 1,4,HangUp

replace 1 with s or _X.

>
> This is supposed to answer the extension '1', wait a second (just to 
> be safe), launch the sms application with 's' and 'a' options (which 
> is supposed to act like an answering service center, to accept 
> incoming messages), then hangup. No way, I see the phone dialing into 
> that extension (i've changed SMSC parameter, obviously), sms_app 
> starts but after a while phone says "transmission failed" (or some 
> other error message). I've tried with different phones brand/type, all 
> claiming to be ETSI compliant (and they are, since sending SMSes 
> through my telco's gw works like a charm).
>
> Cheers,
> Simone.
>
> Roland Zagler ha scritto:
>
>> Hello!
>>
>> Is it possible to run Asterisk as a SMS Service Center and does it work
>> over a directly connected ISDN (CAPI) interface card?
>>
>> Did anyone already use Asterisk for that?
>>
>> Roland Zagler
>> mailto:r.zagler at fog.at
>> @fog smart partners
>