[Asterisk-Users] Vlan question
Tenorio, Leandro
LTenorio at intelaction.com
Tue Aug 17 20:16:38 MST 2004
The other way, at least with Cisco Switches (I saw it also with 3com
switches some time ago), is to set every port with a secondary vlan.
What it does, it sent those 2 vlan u set to the port, it consume less
resources in your switch, and keep you far from confinguring vlan
filtering.
LTenorio
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Mark Woods
Sent: Tuesday, August 17, 2004 11:43 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Vlan question
Your switch has to support vlan trunking, ie. 802.1q. You will have to
set the switch port to trunk, allowing the vlans that you want to be
avilable, then you will set the phone to trunk those two vlans,
assigning one to the pc port.
-Mark
>----- Original Message -----
>From: tmeeks at che-llp.com
>To: asterisk-users at lists.digium.com
>Sent: 13 Aug 04, 2:38 PM
>Subject: [Asterisk-Users] Vlan question
>
>Hi,
>
>I am setting up an Asterisk system with Cisco 7960 phones. I have a
PoE injector to insert between the patch panel and HP 2626 switch. I
plan to plug the users pc into the phone and the phone into the wall. I
would like the phones to have a seperate subnet from the phones for
performance reasons.
>
>May be a silly question, but with the pc and phone sharing the same
switch port, how will it know to seperate the traffic and subnets?
>
>Thanks
>
>tm
>
>ID:[{20040813172548.30403.1811044938-12.6.18.86}]
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list