[Asterisk-Users] First Post: Any existing AVAYA Switch -> Asterisk Voicemail configs?

[Brian Elton]

Avaya refers to this as a 'green feature' and it has to be enabled by
Definity in order to send CID to an analog port. In addition, you must
also be using the TN2793B analog circuit pack.

-CaNaBiS

On Sat, 07 Aug 2004 09:57:17 +0800, Leo Ann Boon <leo at innovax.com.sg> wrote:
> I believe the Definity sends the voicemail integration signal (CID etc)
> via DTMF and not the regular FSK CID supported by *.
> 
> 
> 
> 
> Mike Cathey wrote:
> 
> >On Fri, 2004-08-06 at 06:02, Jason Williams wrote:
> >
> >
> >>It won't work on the FXO
> >>
> >>
> >
> >We verified that the Definity sends CID on analog ports (that's how
> >we're connecting it to our existing VM system).  * doesn't seem to see
> >the CID for some reason though. :\
> >
> >
> >
> >>However it should work fine on the PRI check the definity trunk form
> >>and set send number to y
> >>
> >>
> >
> >We have it configured to send CID, however, it only seems to actually
> >send CID when a call is routed from the PSTN through the Definity to *.
> >
> >Is there something else we're missing here?
> >
> >Someone mentioned that we'd need Q.sig.
> >
> >Cheers,
> >
> >Mike
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>