[Asterisk-Users] CAPI call transfer

[Roland Zagler]

Try specifying your number you want to dial with "b" in front of, e.g.
"Dial(CAPI/01824708169:b01824708752,60)" in your extensions.conf!

Regards,
roland 


Roland Zagler
mailto:laureen at laureen.at
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Jonathan
Sent: Tuesday, August 10, 2004 11:12 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] CAPI call transfer

Hi,

I am having trouble configuring CAPI so that call transfers work.
I make a SIP call to asterisk which goes out on ISDn via CAPI.  Then I
try to do a transfer from the SIP phone which doesn't work and results
in the call being disconnected.

The error message given by asterisk is that it chan_capi can't find an
entry for the outgoing msn for the transfer however the outgoing msn is
the same as that used to make the original call.

Has anyone got any ideas please?

The asterisk trace and my capi.conf are below:

Thank you. Best regards.
Jonathan 

    -- Executing Dial("SIP/192.168.1.162-08186af8",
"CAPI/01824708169:01824708752") in new stack
    -- creating pipe for PLCI=-1
       > sent CONNECT_REQ MN =0x9ee
    -- Called 01824708169:01824708752
    -- CAPI[contr1/01824708169]/11 is making progress passing it to
SIP/192.168.1.162-08186af8
    -- CAPI[contr1/01824708169]/11 is ringing
    -- CAPI[contr1/01824708169]/11 answered
SIP/192.168.1.162-08186af8
  == Spawn extension (SIP, 01824708752, 1) exited non-zero on
'SIP/192.168.1.162-08186af8'
    -- Executing Dial("SIP/192.168.1.162-08186af8",
"CAPI/01824708169:h") in new stack
    -- creating pipe for PLCI=-1
       > sent CONNECT_REQ MN =0xa5c
    -- Called 01824708169:h
    -- Executing Dial("CAPI[contr1/01824708169]/11",
"CAPI/01824708169:170") in new stack
Aug 10 09:55:29 NOTICE[442386]: chan_capi.c:1172 capi_request: didn't
find capi device with outgoing msn = 01824708169. you should check your
config!
Aug 10 09:55:29 NOTICE[442386]: app_dial.c:706 dial_exec: Unable to
create channel of type 'CAPI'
  == Everyone is busy/congested at this time
    -- Executing Congestion("CAPI[contr1/01824708169]/11", "") in new
stack
    -- CAPI Hangingup
       > sent DISCONNECT_REQ PLCI=0x201
    -- removed pipe for PLCI = 0x201
  == Spawn extension (SIP, h, 1) exited non-zero on
'SIP/192.168.1.162-08186af8'

capi.conf
[general]
nationalprefix=0
internationalprefix=44
rxgain=0.8
txgain=0.8

[interfaces]

incomingmsn=*
softdtmf=1

mode=immediate
isdnmode=ptp
msn=01824708,01824708169
controller=1
devices=2

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users