[Asterisk-Users] Cisco SIP Phone 7960 & DTMF Problem

[Miroslav Nachev]

   Hi,

   After discussion I try the following without result:
   <DIALTEMPLATE>
       <TEMPLATE MATCH="#..." Timeout="5" User="Phone" />
       <TEMPLATE MATCH="*" Timeout="5" User="Phone" />
   </DIALTEMPLATE>    

   Then I try, without result too:
   <DIALTEMPLATE>
       <TEMPLATE MATCH="*#" Timeout="5" User="Phone"/>
       <TEMPLATE MATCH="*" Timeout="5" User="Phone" />
   </DIALTEMPLATE>    
   
   Then I try, without result too:
   <DIALTEMPLATE>
       <TEMPLATE MATCH="..#" Timeout="5" User="Phone"/>
       <TEMPLATE MATCH="*" Timeout="5" User="Phone" />
   </DIALTEMPLATE>    

   <DIALTEMPLATE>
       <TEMPLATE MATCH="..#" Timeout="5" User="Phone" Rewrite="*8#"/>
       <TEMPLATE MATCH="*" Timeout="5" User="Phone" />
   </DIALTEMPLATE>    


   Any other suggestions?
   
   
   Best Regards,
   Miroslav Nachev
   
Hiya,
IIRC Cisco's take the '#' as being a 'send what ive dialed' key when 
there is no active call.
for example you could dial 123456, wait for the phone to 'time out' then 
it sends/dials your number
or you could dial 123456# to send 123456 as soon as you press the # key.

So - I would guess that when you dial '*8#' - asterisk is only getting a 
'*8' and not knowing what to do with it.

Dunno if you can change a cisco to not use # to 'send' - too new to all 
this at the mo - this is just what I've observed with playing at home :)

Wayne.

Nicolas Gudino wrote:

>Hello,
>
>On Wed, 2004-08-04 at 04:35, Miroslav Nachev wrote:
>  
>
>>   Hi,
>>
>>   When we use BudgeTone where the DTMF is set to "via RTP (RFC2833)"
>>all the DTMF functionality of Asterisk is working OK. When use Cisco
>>7960 the transfer is working OK, but when I try to "remote pick-up the
>>call" through '*8#' I can't do that because the Cisco Phone start busy
>>signal.
>>   How can I start using all DTMF features using Cisco Phone?
>>    
>>
>
>Did you try by dialing just '*8' ?
>
>  
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users