[Asterisk-Users] IAX2 'no authority found' problem
Simon Ward
simon.ward at unreel.co.uk
Wed Aug 4 07:32:03 MST 2004
Hi everyone,
I'm having some problem trying to set up an IAX connection between two *
servers.
The scenario is :
serverA has an X100p card and will direct all calls from the X100p over
IAX to a specific extension on serverB which is at the other end of an
unfirewalled VPN connection.
At the moment serverA tries to redirect the call to serverB but recieves
this message (it appears on both servers) :
-- Executing Dial("Zap/1-1", "IAX2/test:test at 192.168.1.250/cardiff") in
new stack
-- Called test:test at 192.168.1.250/cardiff
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00006ms SCall: 00001 DCall: 00000 [192.168.1.250:4569]
VERSION : 2
CALLED NUMBER : cardiff
LANGUAGE : en
USERNAME : test
FORMAT : 2
CAPABILITY : 65283
ADSICPE : 2
DATE TIME : 151287361
Rx-Frame Retry[No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00001ms SCall: 00001 DCall: 00001 [192.168.1.250:4569]
CAUSE : No authority found
Aug 4 14:50:02 WARNING[147465]: chan_iax2.c:5339 socket_read: Call rejected
by 192.168.1.250: No authority found
Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00001ms SCall: 00001 DCall: 00001 [192.168.1.250:4569]
-- Hungup 'IAX2/192.168.1.250:4569/1'
== No one is available to answer at this time
Here are excerpts from the config files :
ServerA:
extensions.conf
[incoming]
exten => s,1,Dial(IAX2/test:test at 192.168.1.250/cardiff)
ServerB:
iax.conf
[cardiff]
type=friend
username=test
secret=test
context=sipfonescard
extensions.conf
[sipfonescard]
exten => cardiff,1,Dial(SIP/1101)
Has anyone got any suggestions on what might be the solution to the 'no
authority found' problem, I'm convinced that it must be something pretty
simple that I'm missing but I can't find any tips to point me in the
right direction.
Any suggestions would be appreciated,
Thanks,
Simon Ward
More information about the asterisk-users
mailing list