[Asterisk-Users] weird IAX2 things going on

Steven Critchfield critch at basesys.com
Wed Apr 21 15:36:24 MST 2004


On Wed, 2004-04-21 at 17:31, Mark Phillips wrote:
> Hi all,
> 
> I have 3 * boxes all running the same OS and software version. Machine A
> has an X100P card, machines B and C do not. They all have the same
> dialplan.
> 
> I can dial from machine A to either of the other 2 with no problem. I can
> dial from either of the other 2 to machine A with no problem. I cannot
> dial from B to C or vice versa.
> 
> What's really wierd is that I can dial from machine B through machine A to
> machine C. The IAX2 session then drops machine A from the picture and
> continues directly between B and C. The same happens in reverse.
> 
> Why can I not dial directly from B to C? Do B and C require X100P cards
> before IAX2 will work correctly? I don't think this is the case because
> the call can be passed to them after it has been setup via A.
> 
> Its really bugging me. Any ideas?

Is B and C registering to each other like they are to A?
-- 
Steven Critchfield  <critch at basesys.com>




More information about the asterisk-users mailing list