[Asterisk-Users] t1 won't dial outbound

[Mark Messmore, Technical Support, University Telcom Inc.]

Thanks for the reply.

I didn't include my entire zapata.conf...just the portion that applied
to this call (i.e. group #3)

Please correct me if I have misunderstood how this all works together.
When I see:

-- Executing Dial("SIP/mark-2d08", "Zap/g3/2550559") in new stack
     -- Called g3/2550559
     -- Hungup 'Zap/6-1'

I'm interpreting that this is dialing out on Zap group 3 (which happens
to begin on channel 6).  Please correct me if I'm wrong here...

I'm attaching my entire zapata.conf just to defer any confusion...and to
see if you can see anything.

Also, I'm going to take your suggestion and create another zapata.conf
which will be simplified just to see if there is a conflict somewhere in
there.

Thanks for your help!

Mark



-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Joe Dennick
Sent: Thursday, April 15, 2004 1:46 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] t1 won't dial outbound


It looks like your channel and group statements in the zapata.conf are
the problem.  Notice that when it tries to dial out it does so on
Zap/6-1.  You have the T-1 defined as 'Span 1,' but you are trying to
send the calls to span 6.  It ain't gonna work!  I don't see anywhere
where you've assigned the rest of the channels on that T-1, either.  I
would recommend either grouping them all together (that's the easiest),
or at least making sure you've got all of the channels assigned to
groups.  My zapata.conf is much simpler:
     signalling=pri_net
     group=1
     channel => 1-23

When it dials, then you will see the calls going out on Zap/1-1 or
Zap/1-2, etc.

Good luck; and have fun!

Joe

"Mark Messmore, Technical Support, University Telcom Inc."
<mark at utionline.net> wrote:

 I've posted this problem a couple of times before with little or no
response.  Basically I have a T100P in my * box.  Incoming calls are
working great.  However outgoing calls are not working at all.  I've
copied a previous post into this message which should have all the
necessary info.  Any ideas or suggestions would be greatly appreciated.
Thanks.
  
 Mark
  
  
 
########################################################################
 #################
 OK...I've got an * box with a T100P in it.  For the most part incoming
calls are going through just fine.  Outgoing calls, however, I'm having
some more trouble with.  Whenever I make an outgoing call, the call
begins, however after the dialing process all I hear is dead air.
Here's the output from my * console:
  
 -- Executing Dial("SIP/mark-2d08", "Zap/g3/2550559") in new stack
     -- Called g3/2550559
     -- Hungup 'Zap/6-1'
   == Spawn extension (uti-mainst, 2550559, 1) exited non-zero on
'SIP/mark-2d08'
  
 I've checked with the switch guy...and whatever channel I'm trying to
dial out on is coming up as "blocked" on his switch.  We've compared as
many settings as we can think of and they all seem to be set the same.
I'll post the entries from my zaptel.conf and my zapata.conf in
here...if you have any ideas please send them my way...
  
  
 zaptel.conf
  
 span=1,1,0,d4,ami
 e&m=1-24
 fxsks=25
 loadzone=us
 defaultzone=us
  
 zapata.conf
  
 context=conference
 signalling=em
 switchtype=5ess
 group=3
 callgroup=3
 pickupgroup=3
 channel => 6
  
 busydetect=yes
 callerid=asreceived
 callprogress=yes
 callreturn=yes
 callwaiting=yes
 callwaitingcallerid=yes
 cancallforward=yes
 echocancel=yes
 echocancelwhenbridged=yes
 immediate=no
 language=us
 musiconhold=default
 threewaycalling=yes
 transfer=yes
 usecallerid=yes
########################################################################
 ##########################
 

_________________________________________________________
This mail sent using Secure Message Center
Put SAI Address and NASD blah blah stuff here.


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: zapata.conf
Type: application/octet-stream
Size: 2468 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040415/ee6ff893/zapata.obj