[Asterisk-Users] Booting error - Unable to specify channel 2: No such device

[Anon]

On Sunday 11 April 2004 07:18 pm, Todd Lieberman wrote:
> do a cat /proc/interupts
>
> your should see your hardware showup.
OK...
cat /proc/interrupts
           CPU0
  0:     494600          XT-PIC  timer
  1:       5588          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          1          XT-PIC  rtc
  9:     266296          XT-PIC  ehci_hcd, es1371
 10:    4892925          XT-PIC  usb-uhci, wctdm
 11:    4936093          XT-PIC  ide1, usb-uhci, usb-uhci, wcfxo, eth0
 12:     108609          XT-PIC  PS/2 Mouse
 14:      22056          XT-PIC  ide2
 15:         83          XT-PIC  ide3
NMI:          0
LOC:     494575
ERR:       1278
MIS:          0

I don't see wcfxs.  I did "modprobe wcfxs" and "cat /proc/interrupts" still 
shows the same output.  What do you think is causing to not show on the list 
above?

Thanks,
Anon