[Asterisk-Users] CISCO 7940 and directory/services problem

[Simon Brown]

I have quite successfully set up the Services button to work on the 7940
running SIP.
I have a metric-imperial converter, a foreign exchange rate calculator, a
calendar etc available to users.
The XML is really fussy though. 

Simon

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Rich Adamson
Sent: Thursday, 1 April 2004 23:29
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] CISCO 7940 and directory/services problem


> I have been setting up a * system for my new office I plan to setup soon.
> I have some CISCO 7940 phones.  All appears to be going well in regard 
> to phone calls etc.  Still getting my head around extensions voice mail
etc.
> getting it to work with X100P cards etc.
> 
> I have been trying to implement the DIRECTORIES button, and play with 
> the services buttons.
> 
> Reading from the voip-info site, I have the info from that, however, 
> its not working.
> I am running firmware 6.3 on the phone.  Is there a possible change of 
> implementation? But usually backward compatibility would be covered.
> 
> I also tried pointing the Phone to the ones as listed on the voip-info
site.
> This kinda worked, but most pages don't and the phone just tries and 
> tries to get the page.
> If listing a directories page, it comes back with an error "CMXML Error"
> 
> Any suggestions would help?

On your tftp server (that the Cisco phones boot from), you should have a file
called SIPDefault.cnf that inclues entries like:

directory_url: "http://www.myserver.com/asterisk/directory.html"     ; URL fo
r external Directory location
logo_url: "http://www.myserver.com/asterisk/mylogo.bmp" ; URL for branding
logo to be used on phone display

and a file like SIP<MyPhonesMAC>.cnf with an entry like:
messages_uri: "3123" 

The directory_url must point to a valid web page containing xml statements
like:
<CiscoIPPhoneDirectory>
<Title>IP Telephony Directory</Title>
<Prompt>People reachable via VoIP</Prompt> <DirectoryEntry> <Name>Wife</Name>
<Telephone>3005</Telephone> </DirectoryEntry> <DirectoryEntry>
<Name>GirlFriend</Name> <Telephone>3006</Telephone> </DirectoryEntry>
</CiscoIPPhoneDirectory> 

Each time you press the C7940's "Directory" button and select "External
Directory", the C7960 will read the above XML file and display the entries.

If you program the "messages_url:" entry as shown above, each time you press
the "Messages" button on the phone, it will auto-dial x3123. 
Obviously, you need an entry in extensions.conf like:
 exten => 3123,1,VoicemailMain2(${CALLERIDNUM})
to instruct asterisk what to do when a phone dials x3123.

The "services" button on the Cisco "sip" phones cannot be programmed as far
as I know. Not heard of anyone that has made it work unless the phone is
running Cisco's proprietary firmware (not sip).

Rich


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



-----
This mail was content checked for malicious code and viruses
by GFI MailSecurity.