[Asterisk-Users] Cisco 2600 and ASTERISK

[Bartosz Jozwiak]

I have fixed i already.
And still it does not want to work :(


----- Original Message ----- 
From: "Sean Figgins" <sfiggins at mail.celicas.org>
To: <asterisk-users at lists.digium.com>
Sent: Friday, September 26, 2003 11:58 AM
Subject: Re: [Asterisk-Users] Cisco 2600 and ASTERISK


> On Fri, 26 Sep 2003, Bartosz Jozwiak wrote:
> 
> > I have pointed it to Asterisk for sure not to local cisco ethernet.
> > I think there is something wrong with the router.
> 
> In the exerpt from the config you posted (below), the destination in the
> dial-peer is the same as the address on the enternet interface.  Perhaps
> this is not your actual config?
> 
> In any event, if this is correct, it should work.
> 
> > > > dial-peer voice 1000 voip
> > > >  max-conn 4
> > > >  destination-pattern 9999
> > > >  req-qos guaranteed-delay
> > > >  codec g711ulaw
> > > >  ip precedence 5
> > > >  no vad
> > > >  session target ipv4:66.178.37.169
> > > > !
> > > > !
> > > > interface Ethernet0/0
> > > >  ip address 66.178.37.169 255.255.254.0
> > > >  no ip directed-broadcast
> > > >  half-duplex
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>