[Asterisk-Users] Cisco 2600 and ASTERISK

[Sean Figgins]

On Fri, 26 Sep 2003, Bartosz Jozwiak wrote:

> I have pointed it to Asterisk for sure not to local cisco ethernet.
> I think there is something wrong with the router.

In the exerpt from the config you posted (below), the destination in the
dial-peer is the same as the address on the enternet interface.  Perhaps
this is not your actual config?

In any event, if this is correct, it should work.

> > > dial-peer voice 1000 voip
> > >  max-conn 4
> > >  destination-pattern 9999
> > >  req-qos guaranteed-delay
> > >  codec g711ulaw
> > >  ip precedence 5
> > >  no vad
> > >  session target ipv4:66.178.37.169
> > > !
> > > !
> > > interface Ethernet0/0
> > >  ip address 66.178.37.169 255.255.254.0
> > >  no ip directed-broadcast
> > >  half-duplex