[Asterisk-Users] Need help with H.323

[Klaus-Peter Junghanns]

Am Don, 2003-09-18 um 16.36 schrieb Roy Sigurd Karlsbakk:
> hi all

hi roy,

> 
> I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with
> the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h
> software can only be configured to point to a gatekeeper. I know I don't
> need to do this, but it's a test before I setup my Symbol Netvision
> phones (I don't have an access point for them now). First, this is what
> I have, and what I've done:
> 
> - Platform is Debian Woody/Stable
> - Asterisk is fresh from CVS, and so is chan_h323
> - chan_h323 did compile, but also died from a rather nasty SIGSEGV
>   (reported earlier) with Open H.323 v1.11.7 and PWLib v1.4.11. I
>   checked them out from CVS instead after being adviced so by diana
>   (on irc), and it now loads into memory without any fuzz.
> - Several people have told me chan_capi can work as a gatekeeper, so
>   there should be no use for gnugk or any others. I have yet to find
>   where this is hidden. FWICS, this is all commented out (ast_h323.cpp
>   line 722). Is this right or have I overseen anything?

i can confirm that chan_capi will not work as a gatekeeper under any
circumstances! somebody is obviously trying to confuse you.;-)

> - If this cannot be done alone with chan_h323, I guess I need to use
>   gnugk or something. Can someone help me out how these two should be
>   configured to work together? Also - is it possible to run gnugk on
>   the same host as asterisk?
> 
> Thanks for all help
> 
> Best regards
> 
> Roy Sigurd Karlsbakk <roy at karlsbakk.net>
> 

best regards

kapejod
-- 
Klaus-Peter Junghanns

CEO,CTO
Junghanns.NET GmbH
Breite Strasse 13 - 12167 Berlin - Germany
fon:	+49 30 79705392
fax:	+49 30 79705391
iaxtel:	1-700-157-8753
email:	kpj at junghanns.net
http://www.junghanns.net/asterisk