[Asterisk-Users] G729

[Matthew Hardeman]

LOL

No.

The codec in asterisk is really g729a.  It's labeled as b for some
bizarre historical reason.

It *will* work with any SIP phone that properly supports G729a.  I use
it with the Cisco 7960s with great success.

Matt Hardeman
PaperSoft


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Zac
Sprackett
Sent: Friday, September 12, 2003 3:51 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] G729

Hrm, another issue.  My phone does G729A... This codec only does G729B
but is advertised as doing G729.

Guess I'm SOL.

-z

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Zac
Sprackett
> Sent: Friday, September 12, 2003 4:19 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] G729
> 
> 
> Hi,
> 
> I recently purchased some G729 licenses for asterisk.  I'm 
> concerned with the registration process.  My build tools are not 
> physically located on the same machine from which I build 
> asterisk.  I build RPMs on another machine and then install them 
> on my production server.  Am I going to cause myself trouble by 
> runnning Registration on my non build host?
> 
> Thanks
> -z
> 

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users