[Asterisk-Users] (no subject)

[Tilghman Lesher]

On Friday 12 September 2003 02:37 pm, Jim Paraschou wrote:
> I have problem with a TDM40B installation.
> When i modprobe wcfxs the error i get is the
> following:
>
> /lib/modules/2.4.19-4GB/misc/wcfxs.o: init_module: No
> such device
> Hint: insmod errors can be caused by incorrect module
> parameters, including invalid IO or IRQ parameters.
>       You may find more information in syslog or the
> output from dmesg
> /lib/modules/2.4.19-4GB/misc/wcfxs.o: insmod
> /lib/modules/2.4.19-4GB/misc/wcfxs.o failed
> /lib/modules/2.4.19-4GB/misc/wcfxs.o: insmod wcfxs
> failed
>
> Does anybody know the poblem?

Yep, it probably will not work with your motherboard.  You might try
setting -DNO_CALIBRATION in the Makefile, then running 'make clean
all install' and trying again (this has worked for some people).
Failing that, try it with a different motherboard.

-Tilghman