[Asterisk-Users] E400P woes

[Martin Pycko]

So you don't receive any answer from the other side ?
Is the circuit in alarm ? Can they do remote loopup test ?

It might be that they don't have their D-channel turned on ...

Martin

On Fri, 12 Sep 2003, Alastair Maw wrote:

>
> OK, so I've done this:
>
>    *CLI> pri intense debug span 1
>    Enabled EXTENSIVE debugging on span 1
>    Sending Set Asynchronous Balanced Mode Extended
>
>
>    > [00 01 7f ]
>    > Unnumbered frame:
>    > SAPI: 00  C/R: 0 EA: 0
>    >  TEI: 000        EA: 1
>    >   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME ]
>    > 0 bytes of data
>    Sending Set Asynchronous Balanced Mode Extended
>
>
> The above is repeated about once a second.
>
> Our provider does indeed have a System-X switch. Is this a known problem
> then? Is there no way to resolve it? I couldn't find anything on Google
> about it...
>
> I'd put a TE410P card in instead, but the 1u servers we have are all P4s
> and don't have 3.3V PCI slots. The official Word from Digium is that
> they'll have a 5V version of the TE410P out in about six weeks' time,
> but we have some services that need to go live on these new E1 lines in
> about three weeks time, plus we need to do some testing, etc.
>
> Time to buy a Xeon with 3.3V slots, I guess. :(
>
> --
> Alastair Maw <al.maw at mxtelecom.com>
> MX Telecom - Systems Analyst
> http://www.mxtelecom.com
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>