[Asterisk-Users] Cisco 7960 + SIP

[Shaun Ewing]

Hello again,

After doing some searching of the list archives, I came across a message by
John Todd posted back in July ()

To cut a long story short, to be able to use SIP on my phone, I need to
P0S30203.bin image.

Is there anyway of getting this image without getting a Cisco SMARTnet
agreement?

-Shaun

----- Original Message ----- 
From: "Shaun Ewing" <asterisk at ewing.dropbear.id.au>
To: <asterisk-users at lists.digium.com>
Sent: Friday, September 12, 2003 3:58 PM
Subject: [Asterisk-Users] Cisco 7960 + SIP


> Hello all,
>
> I know this isn't strictly Asterisk, but I'm sure that there are more
people
> here using the Cisco 7960 w/ SIP, so I thought I'd post here.
>
> I've just bought a Cisco 7960 phone to use with Asterisk. It came with the
> CallManager image on it.
>
> I've got the 4.4 SIP images (P0S3-04-4-00).
>
> If I put "P0S3-04-4-00" in the OS79XX.TXT file, the phone downloads this
> fine (watching TFTP server debug).
>
> It then proceeds to request P0S3-04-.bin. I don't know why. Naturally this
> file isn't found.
>
> I tried renaming the file to P0S3-04-.bin. The phone then downloads around
> 80% before aborting.
>
> I hope somebody might be able to shed some light on the situation. Any
help
> would be greatly appreciated.
>
> Thanks,
> Shaun
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users