[Asterisk-Users] Transfer (again!)

[Daniel ANDRE]

This works only if transfering to a phone wich is onhook. If it is off 
hook (busy), it doesn't work

Is there any possibiliy to simulate transfert with dial plan?

Regards,
Daniel

William Zhang a écrit:

>GS phone does blind transfer only. Afer pressing transfer, you will
>hear dialtone and then dial the number, after dial the whole number,
>either wait more than 5 seconds or press "redial/send" button, then
>hangup, it should work.
>
>--- "WipeOut ." <wipeout at linuxmail.org> wrote:
>  
>
>>These are probably more issues for grandstream.. Maybe mail
>>support at grandstream.com with the issues about dropping both calls
>>when the phone is hung up..
>>
>>Later
>>
>>    
>>
>>>Hello,
>>>
>>>I am building an asterisk PBX with some stuff to make a usable VOIP
>>>      
>>>
>>/ 
>>    
>>
>>>PSTN Gateway. I use the following devices:
>>>SIP Phones from GrandStream for VOIP side
>>>OpenLine4 from voicetronix for PSTN Side
>>>
>>>I am building things step by step with some priorities.
>>>
>>>I have now a working system able to place and receive calls from/to
>>>      
>>>
>>pstn.
>>    
>>
>>>Before attempting to bring other functions (like voice messaging)
>>>      
>>>
>>up i 
>>    
>>
>>>want to have a proper call transfert functionnality.
>>>I can't have either blind transfert or consultative transfert
>>>      
>>>
>>working 
>>    
>>
>>>properly.  I am VERY interested in consultative transfert but I
>>>      
>>>
>>don't 
>>    
>>
>>>see where and how 'transfer', 'flash' or 'hold' keys and handle in 
>>>asterisk code.
>>>
>>>What I would like to do is:
>>>A and B are taking each other
>>>A press flash key: B listens music (thet works) and A can call C
>>>A and C can talk each other but there is no mean for A to transfert
>>>      
>>>
>>B to 
>>    
>>
>>>C. Where should I patch the code to be able to do that?
>>>Here A can talk either with B or C by pressing on 'Flash' Key but
>>>      
>>>
>>can't 
>>    
>>
>>>hang up any call.
>>>
>>>
>>>IF C is Unavalaible, I haven't seen how to get B back
>>>
>>>I welcome any idea about transfert application as it is a main
>>>      
>>>
>>issue for me:
>>    
>>
>>>AGI application,
>>>Use of Transfert built in
>>>Proper use of extension.conf file,
>>>Patch to the source code of asterisk (I am able to do such a patch
>>>      
>>>
>>but I 
>>    
>>
>>>don't know where to look... chan_sip? apps directory, other?)
>>>
>>>Best ragards,
>>>
>>>Daniel
>>>
>>>-- 
>>>Daniel ANDRE (mailto:dandre at iris-tech.fr)
>>>IRIS Technologies - http://www.iris-tech.com
>>>Serveur kwartz - http://www.kwartz.com
>>>
>>>
>>>_______________________________________________
>>>Asterisk-Users mailing list
>>>Asterisk-Users at lists.digium.com
>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>      
>>>
>>-- 
>>______________________________________________
>>http://www.linuxmail.org/
>>Now with e-mail forwarding for only US$5.95/yr
>>
>>Powered by Outblaze
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>    
>>
>
>
>=====
>
>William Zhang
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>  
>

-- 
Daniel ANDRE (mailto:dandre at iris-tech.fr)
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030905/a1439e2f/attachment.htm