[Asterisk-Users] Pointer to upgrade 7960sip beyond v3.2.0?

[Joseph Finley]

Rich, you can do **# and go into the Network config and hit **# again, you
should notice the LockPad come unlocked and then you can make changes.  If
you upgraded, the default password is "cisco"

Joe


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Rich Adamson
Sent: Wednesday, September 03, 2003 9:58 PM
To: Asterisk-users-list
Subject: [Asterisk-Users] Pointer to upgrade 7960sip beyond v3.2.0?


Slightly off topic, but maybe some can suggest something off list...

Trying to upgrade a 7960 that was running skinny. I've got sip v3.2.0
installed and running, and am able to place calls via *, etc.

However, when upgrading to v4.4.0 I can never get to the point of 
being able to place a call (eg, no dialtone, etc). I can ping the phone,
look at the Network Config, etc, but I can't unlock it to do any configs.

Any thoughts?

Rich
radamson at routers.com


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users