[Asterisk-Users] Connecting to an Ericsson AXT121 with a Digium Wildcat E100 card

[Martin Pycko]

Your configs look ok. All you need is BNC to RJ45 converter (I think the
standard is G.703)

regards
Martin

On Tue, 2 Sep 2003, Langley, Sean wrote:

> Dear Telcotype Braniacs,
>
> I have tried doing a google search to find out what this switch looks like, what the physical interface is, but havn't been successful.  I am quite new to the ISDN world so I'm not sure what to expect when I see this switch.  Does anyone have any experience connecting to this switch?  The following is basically all I have been given for info:
>
> 1) Ericsson, AXT121, interface ETCST (ROF 137 2764/2 rev R3A), Euro-ISDN. Connected to FMV test network.
> 2) Subscriber normally synchronised (sync) from network.
> 3) 2,048 Mbit, 32TS-PCM, CCS in TS16.
> 4) HDB3, 75 ohm coax.
> 5) CRC check enabled.
>
> Like I said, I am new to the ISDN world, my digium card has an RJ45 connection type, what do I need to physically connect to the above mentioned switch?
>
> I presume my zaptel configuration will be:
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> dchan=16
> bchan=17-31
> loadzone=uk   (not sure whether this is correct for sweden?)
> defaultzone=uk
>
> and for zapata:
> switchtype=euroisdn
> signalling=pri_net
> context=inc-e1   (or default...)
> channel=1-15,17-31
>
> Regards,
>
> Sean Langley, P.Eng
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>