[Asterisk-Users] passing digits for voicemail from sip gateway

[Eric Wieling]

Sounds to me like you are using inband DTMF, which won't work unless the
codec is ulaw or alaw.  Use out of band DTMF aka rfc2833 or info.

On Mon, 2003-10-27 at 13:50, Steve Dolloff wrote:
> I am seeing strange behavior that I don't understand.  Voicemail2 and
> voicemailmain2 work fine if I call from a sip phone directly connected
> to *, but if I call either of them from an analog line on the other side
> of a sip gateway, voicemail seems to ignore digits.  If I am recording a
> message and press #, nothing happens except that it records the tone
> onto the message and I can't specify a mailbox using digits either, it
> just hangs up on me.  Is this a config problem on the gateway?
> 
> Thanks,
> 
> Stephen
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Sample configs, scripts, more : http://www.fnords.org/~eric/asterisk/

BTEL Consulting 504-899-1387 or 850-484-4545 or 877-677-9643