[Asterisk-Users] wcfxs error

[Andrew Kohlsmith]

> hi guys, i got a TDM400P FXS card an everything is
> fine except for this when i do modprobe wcfxs
> , the linux shows 2 TigerJet Network Inc Model 300
> 128k. i don't know why it is showing 2 of them. or is
> that what it is?

> Freshmaker version: 63
> Freshmaker passed register test
> ProSLIC on module 0 insane (1) 0 should be 2
> Module 0: Not installed
> ProSLIC on module 1 insane (1) 0 cshould be 2
> Module 1: Not installed
> ProSLIC on module 2 insane (1) 0 should be 2
> Module 2: Not installed
> ProSLIC on module 3 insane (1) 0 should be 2
> Module 3: Not installed

I get this with my TDM400P as well, except that it shows up as identically 
to the X100P in lspci:

00:0b.0 Communication controller: Tiger Jet Network Inc. Intel 537
00:0c.0 Communication controller: Tiger Jet Network Inc. Intel 537

lspci -v:

00:0b.0 Communication controller: Tiger Jet Network Inc. Intel 537
        Subsystem: Unknown device b100:0003
        Flags: bus master, medium devsel, latency 32, IRQ 9
        I/O ports at 6500 [size=256]
        Memory at e4021000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

00:0c.0 Communication controller: Tiger Jet Network Inc. Intel 537
        Subsystem: Unknown device 8085:0003
        Flags: bus master, medium devsel, latency 32, IRQ 15
        I/O ports at 6600 [size=256]
        Memory at e4022000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

I also get 

Power alarm on module 1, resetting!

many times whenever the card is in use and have had all audio just up and 
quit once in a while...  Is there a particular tech support mehodology with 
Digium or should I just RMA the module?

Regards,
Andrew