[Asterisk-Users] No detection of Line Busy

[Herc]

----- Original Message ----- 
From: "WipeOut" <wipe_out at onetel.com>
To: <asterisk-users at lists.digium.com>
Sent: Monday, October 20, 2003 9:26 PM
Subject: Re: [Asterisk-Users] No detection of Line Busy


> herc at wavelink.com.my wrote:
>
> >Hello,
> >
> >I am quite new to asterisk.
> >I managed to connect our 2 branch offices with asterisk.
> >
> >In one side, our linux asterisk box is connected to the leased line going
> >to our other office and on the other side its connected to office PBX
through a
> >channel bank.
> >
> >This installation is running smoothly, except for one thing.
> >If an extension is busy, i want to transfer that call to a near by
> >one, so i did like this,
> > Dial(Zap/g1/55|15|t)
> > Dial(Zap/g1/59|15|t)
> >the prob is, when ext. 55 is busy, the caller hear busy tone and thats
all,
> >asterisk doesn't execute the second line.
> >even when the ext. 55 is busy, still the asterisk log says,that zap line
> >as answered.
> >I need to get this thing settled quickly, cos, this is a already found
> >feature in our office hardware PBX.
> >Can anyone pls help me????
> >
> >Herc
> >
> >
> >
> >
>
> Try something like..
>
> exten => 55,1,Dial(Zap/x|15|t)
> exten => 55,102,Dial(Zap/y|15|t)
>
> Where Zap/x is the channel that connects extension 55 and Zap/y is the
> channel that connects to extension 59..
>
> Later..
>

I am not directlyl connecting to extensions 55 and 59. I have few office PBX
extensions coming
to the channel bank(which is connected to linux box), and i have grouped
those channels under 'g1'.
so i am dialing ext 55 and 59 from extensions in group 'g1'.

Herc