[Asterisk-Users] Adtran TA750 & T100P

Jose Quinteiro asterisk at quinteiro.org
Sun Oct 19 04:31:37 MST 2003


I crimped one using cat 5 cable since this is just a bench-test unit. 
Thanks for the link, though.

Turns out this question is answered in the FAQ, but it's certainly much 
easier to crimp one using Jared's pictures than the terse pin-out in the 
answer.

asterisk # ztcfg -vvv

Zaptel Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Slaves: 08)
Channel 09: FXS Kewlstart (Default) (Slaves: 09)
Channel 10: FXS Kewlstart (Default) (Slaves: 10)
Channel 11: FXS Kewlstart (Default) (Slaves: 11)
Channel 12: FXS Kewlstart (Default) (Slaves: 12)
Channel 13: FXS Kewlstart (Default) (Slaves: 13)
Channel 14: FXS Kewlstart (Default) (Slaves: 14)
Channel 15: FXS Kewlstart (Default) (Slaves: 15)
Channel 16: FXS Kewlstart (Default) (Slaves: 16)
Channel 17: FXS Kewlstart (Default) (Slaves: 17)
Channel 18: FXS Kewlstart (Default) (Slaves: 18)
Channel 19: FXS Kewlstart (Default) (Slaves: 19)
Channel 20: FXS Kewlstart (Default) (Slaves: 20)
Channel 21: FXS Kewlstart (Default) (Slaves: 21)
Channel 22: FXS Kewlstart (Default) (Slaves: 22)
Channel 23: FXS Kewlstart (Default) (Slaves: 23)
Channel 24: FXS Kewlstart (Default) (Slaves: 24)

24 channels configured.



And green lights all 'round.  Thanks all.


Ken Godee wrote:
> Jose Quinteiro wrote:
> 
>> Hello,
>>
>> So all the pieces are finally here, and I'm ready to play.  I remember 
>> reading on this list that the connection Channel Bank <-> T100P 
>> requires a "reverse cable."  Is this a regular Ethernet reverse cable 
>> (i.e., only a couple of pairs reversed?) Please help me before I blow 
>> something up!
>>
>> Saludos,
>> Jose.
> 
> 
> Here's a link to Adtran's site w/discrip for pin outs for loopback 
> adapters and T1 crossover.
> 
> http://www.adtran.com/adtranpx/Doc/0/BIAU1PH6DJBH39S2038BE81ID8/CU-94a6a9d76bfc11d78ff20c045003.html 
> 
> 
> Here's a site that sells premade T1 cables by the foot. T1 cables should 
> be 22awg solid, and each pair individually shielded. They  also include 
> shielded RJ connectors on there cables as well.
> $16.00 + .70 per foot, good cables.
> 
> http://www.stonewallcable.com/product.asp?dept%5Fid=134&pf%5Fid=SC%2D9598%2DX+++++++++++ 
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list