[Asterisk-Users] e100p in Australia

[asterisk at wowinternet.com.au]

I looked at the FRITZ card but as far as i could see it's a 2 channel BRI card 
I need PRI, or is ther eanother one I missed?


Quoting "Michael A. Miller" <Michael.Miller at cedillas.com>:

> Just a couple of notes on the ISDN issue in Australia...
> 
> I agree with the audio quality of the NETjet-s. I also had a horrible time
> working out the DTMF detection under ISDN4Linux. Overall, I can not fault
> the hardware and guys at Traverse were quick to help out but it is not
> production quality for audio.
> 
> I finally had to switch to the AVM FRITZ!Card PCI. It is A-Tick approved.
> The local distributor is listed on their website. The audio quality is
> great and there are no DTMF issues with the card.
> 
> Please feel free to let me know if anyone would more info on my
> experiences with both cards.
> 
> 
> Michael
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Anthony Wood
> Sent: Wednesday, October 15, 2003 5:01 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] e100p in Australia
> 
> On Wed, Oct 15, 2003 at 12:50:33PM -0500, Stephen Dredge wrote:
> >
> > I've seen this question asked before but haven't seen a definative
> answer.
> > Does the e100p work in australia? Did any one who was asking the
> question
> 
> You need written permission from your Telco to use non-approved hardware,
> I think US $595 + AU $10,000 fine is more than US$1495 :-)
> 
> > before bite the bullet and get one? I can get a te410 if i really have
> to but
> > would prefer to stay with the cheaper option.
> 
> NetJet-S apparently works with ISDN BRI (E.g. onramp 2) and Asterisk, but
> there
> are some echo issues for the local end of the call.
> 
> There was a Melbourne guy using one, I'm not sure how he's gone in the
> last 4 months:
> 
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Mark
> > McKibbin
> > Sent: Friday, 13 June 2003 1:01 p.m.
> > To: asterisk-users at lists.digium.com
> > Subject: [Asterisk-Users] E1 cards
> >
> >
> > We are not having any luck with the E100p card here in Australia, it
> > will work with a crossover cable to another device but will not talk to
> > our Telco Telstra who probably have a weird implementation of an E1.
> >
> > Any suggestions on a replacement?
> >
> > Regards
> >
> > Mark McKibbin
> > DCS Internet
> > 64 Queen St
> > Warragul
> > Victoria    3820
> > Australia
> > www.dcsi.net.au
> > mark at team.dcsi.net.au
> > Ph. 1300 665575
> > Fx. 1300 556595
> --
> Woody
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 




-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/