[Asterisk-Users] T100P & Phones Configuration

[PBX]

So...

I would need as you noted two T100P cards or a T400P.  The T1 goes into
the * Server and the second port of a T400P goes back to the asterisk
server. Then the extensions get broken out from the Channel bank?

Geoff

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of James Sharp
Posted At: Saturday, October 11, 2003 12:02 AM
Posted To: Asterisk User Group
Conversation: [Asterisk-Users] T100P & Phones Configuration
Subject: Re: [Asterisk-Users] T100P & Phones Configuration


> Below you will find, what I believe to be a typical setup with a T100P

> card.  My question is -
>
> 1. Is this correct?

Possibly.  Depends on if you use a channel bank that can do add/drop and
you're not using a PRI.

You'll take your incoming T1 and go into 1 T100P and use another T100P
to feed out to your channel bank...or you can get a T400P and just have
one card in the system.


>
> 2. What kind of phones would be needed here... (Would you have to use 
> Digital phones)  And if so what would you recommend.
>

You can use anything from a $9 WalMart phone to a $300 ADSI analog
phone.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users