[Asterisk-Users] No Ringing from PSTN

[mick at netexpress.com.au]

I set mine up like this


" exten => 1234,2,Dial(sip/mick at 192.168.1.1,20,r) "

And everytime it rings I get

" exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp
line:872 "

And * falls over


This is with a voicetronix openline4 card


Any ideas ???


Regards Mick 
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Eric Wieling
Sent: Friday, 10 October 2003 6:14 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] No Ringing from PSTN


You can send a fake ring by using something like:

exten => 1234,1,Dial(SIP/1234 at 1234,20,r)

Assuming the ATA is in the sip.conf as [1234]

However, this does NOT solve the underlying problem.

On Thu, 2003-10-09 at 15:29, Steve Dolloff wrote:
> Here is my Configuration
> 
> PSTN -> Cisco AS5350 -> SIP -> ASTERISK -> SIP -> ATA186
> 
> When I call from the pstn to the ATA, the ATA rings but I don't hear 
> anything on the calling side until the call is picked up.
> 
> When I call from the ATA, everything seems to work fine.
> 
> When I bypassed ASTERISK, everything seems to work fine.
> 
> Anyone know what I might have configured wrong?
> 
> Thanks,
> 
> Stephen
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Sample configs and more: http://www.fnords.org/~eric/asterisk/

BTEL Consulting
+1-850-484-4535 x2111 (Pensacola)
+1-504-595-3916 x2111 (New Orleans)
+1-877-677-9643 x2111 (Toll Free)

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users