[Asterisk-Users] Has anyone got * working with Xten soft phones

[Fats Neutron]

On 2/10/03 3:51 pm, "Joseph Finley" <jfinley at prcontrol.com> wrote:

> 
> I use mine all the time.  Things to check or set:
> 
> Under System Settings>Network
> 
> 1- Set the IP of you * box in "Outbound SIP Proxy"
> 
> Under System Settings>Sip Proxy
> 
> 1- Enable yes
> 2- Username (the name or number in your SIP.CONF [brackets]
> 3- Leave Authorized User blank (and remark out in SIP.CONF if you have it in
> there.)
> 4- Obviously set the password
> 5- Domain/Realm: the IP of your * box.
> 6- Sip Proxy: the IP of your * box.
> 7- Send Internal IP: ON
> 
> Under System Settings>Audio Device
> 
> 1- Make sure it's your mic and not soemthing else.
> 
> 
> Under Advanced System Settings>Feature Settings
> 
> DTMF Force Send In Band: Yes  (is you use inband in your sip.conf)
> 
> 
> That should do it.  Mine works fine.
> 
> Regards,
> Joe
> 
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Fats Neutron
> Sent: Thursday, October 02, 2003 9:18 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Has anyone got * working with Xten soft phones
> 
> 
> I have tried loads of configurations but I cannot get it to work.
> 
> I basically have three computers and want to use soft phones on two of them
> to connect to asterisk so I can use them instead of dialling into my X100P
> card as the phone bill is getting bigger.
> 
> I assume that I can configure * to accept calls from the soft phones and
> then route them according to my dial plan. I am basically trying to write
> some extensions to asterisk and need to debug the code but need to phone in
> to do it.
> 
> I could route in from the net if it wasn't for the fact that I am behind a
> NAT and I've decided to give up on getting it to work as I have just got
> stuck.
> 
> So this is another option to attempt to get debugging.
> 
> So to paraphrase: Has anyone got a setup working with xten soft phones
> behind a NAT and if so could you share your setup with me.
> 
> Any help would be appreciated.
> 
> Thanks in advance.
> Fats.
> 

I've tried those settings and so far so good. At least it seems to be
talking to asterisk.

What are your settings in sip.conf?

Also how do you get the soft phone to dial an internal extension?

Thanks for your help. Fingers crossed I figure this out.

Fats.