[Asterisk-Users] Handytone 286 - calling out

[Senad Jordanovic]

Andrew Gillham wrote:
> Senad Jordanovic wrote:
> 
>> Hi,
>> 
>> Just received recently released Grandstream handytone 286 ATA for
>> testing. 
>> 
>> I can call ATA from any other extensions and conversations seems to
>> be of quite good quality. However placing calls from ATA is not
>> possible at all to any extensions. After dialing there no
>> indications of any kind from ATA at all. It just "hangs in there".
>> 
>> ATA is behind NAT, registers to an * with public IP with no problems
>> and it uses 1.0.4.17 firmware. Web config screen has detected
>> "firewall/NAT type is open Internet" as network firewall.
>> 
>> 
>> 
> Are you able to use tcpdump on the asterisk box to capture traffic
> from the ATA?  Or Ethereal if you have X installed on the Linux box. 
> 
> It would be interesting to see if the ATA sends anything after you
> dial the '1234#' sequence. 
> 
> On my Grandstream 101 phone I have not had any trouble placing calls.
> I don't have the 'Outbound Proxy' field configured, and I re-ordered
> the codec preferences as well.  Other than that it is pretty much
> stock with SIP server / user and authentication configured.   
> 
> -Andrew
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users 

I have tested several GS 101s as well, and they worked. I will try to
capture traffic, then we will see from there.

Ta