[Asterisk-Users] Handytone 286 - calling out

[Andrew Gillham]

Senad Jordanovic wrote:

>Hi,
>
>Just received recently released Grandstream handytone 286 ATA for
>testing.
>
>I can call ATA from any other extensions and conversations seems to be
>of quite good quality. However placing calls from ATA is not possible at
>all to any extensions.
>After dialing there no indications of any kind from ATA at all. It just
>"hangs in there".
>
>ATA is behind NAT, registers to an * with public IP with no problems and
>it uses 1.0.4.17 firmware. Web config screen has detected "firewall/NAT
>type is open Internet" as network firewall.
>
>  
>
Are you able to use tcpdump on the asterisk box to capture traffic
from the ATA?  Or Ethereal if you have X installed on the Linux box.

It would be interesting to see if the ATA sends anything after you
dial the '1234#' sequence.

On my Grandstream 101 phone I have not had any trouble placing calls.
I don't have the 'Outbound Proxy' field configured, and I re-ordered
the codec preferences as well.  Other than that it is pretty much
stock with SIP server / user and authentication configured.

-Andrew