[Asterisk-Users] Still TDM400P problem

[Michiel Betel]

JanM wrote:

>Hi again all,
>
>I have searched the list for help with my problem but I can´t find an
>answer. I only manage to get one port of my TDM400P card working.
>
>When I do dmesg I get following, seems like four discovered ports:
>---------------
>Zapata Telephony Interface Registered on major 196
>PCI: Found IRQ 11 for device 02:00.0
>PCI: Sharing IRQ 11 with 02:07.1
>PCI: Sharing IRQ 11 with 02:0c.0
>Freshmaker version: 63
>Freshmaker passed register test
>Module 0: Installed -- AUTO
>Module 1: Installed -- AUTO
>Module 2: Installed -- AUTO
>Module 3: Installed -- AUTO
>Found a Wildcard FXS: Wildcard TDM400P REV E/F (4 modules)
>Registered tone zone 5 (Finland)
>----------------
>
>But when I do ztcfg -vv I only get one port configured:
>----------------
>Zaptel Configuration
>======================
>Channel map:
>Channel 01: FXO Kewlstart (Default) (Slaves: 01)
>1 channels configured.
>----------------
>
>How do I configure/load the rest of the ports?
>  
>
Add them in /etc/zaptel.conf... ztcfg reads this file and configures zap 
ports accordingly

Michiel