[Asterisk-Users] Zap timeout not occurring

[Jorge Mendoza]

Some channel banks have reversal polarity detection (far end answer 
supervision). How * handle this signal?

Jorge

Don Pobanz wrote:

>On Wednesday, November 12, 2003 3:47 PM, Tom Weeks 
>[SMTP:junk at redrockweb.com] wrote:
>  
>
>>Good day,
>>
>>I am trying to setup an outbound dial plan which will time out if no
>>answer.  Using a X100P with the following dial command :
>>
>>
>>exten => 101,3,Dial(Zap/1/3036972357,5) ; try the desk line - fail to
>>step 104
>>
>>    
>>
>
>That is right, it does not time out and never will correctly since the 
>X100P 'seizes' the line from the phone company immediately upon dialing 
>so the X100P does not know whether the far end  phone is ringing, is 
>busy or if someone has answered. I believe it would take getting some 
>type of digital interface (T1 or ISDN) in order to have far end answer 
>supervision.
>
>Don Pobanz
>
>  
>
>>It dials out successfully, but never times out.  I have a basic 
>>    
>>
>Zapata
>  
>
>>config :
>>
>>group = 1
>>context = RedRockWeb
>>language = en
>>signalling = fxs_ks
>>usecallerid = yes
>>hidecallerid = no
>>echocancel = yes
>>echocancelwhenbridged = no
>>immediate = no
>>channel => 1-2
>>
>>Suggestions?
>>
>>Thanks!
>>
>>Tom
>>
>>tweeks at tellink-corp.com
>>www.tellink-corp.com
>>303-697-2357
>>303-697-3103 fax << File: ATT00015.htm >> 
>>    
>>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>