[Asterisk-Users] Asterisk timing

Eric Wieling eric at fnords.org
Mon Nov 10 07:31:57 MST 2003


Try a different motherboard.  More than a few people have solved their
problems by switching to a different motherboard.  If you are having
problems with the ZapTel cards sharing IRQs then try enabling APIC on
UniProcessor machines (it's a config option when building the kernel)

On Mon, 2003-11-10 at 08:14, Tais M. Hansen wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On Monday 10 November 2003 14:37, WipeOut wrote:
> > >So if you only have smp systems with ohci and no zaptel cards (because
> > > it's a sip/iax2 gateway) then you're screwed?
> > Pretty much..
> > Or you can spend the $100 and get an X100P to get zaptel timing and
> > support Digium at the same time..
> 
> No free slots in our sip/iax2 gateways.
> 
> I now have an E100P, an (possibly defective) E400P and two TE410P cards. Only 
> the E100P works flawlessly. The E400P doesn't work with the newest zaptel 
> driver and the one TE410P card I've tested apparently has some serious IRQ 
> issues as shown below.
> 
> Also, try explaining a manager that we've purchased for more than $5000 worth 
> of interfaces of which only 1/4 works... then tell him you need more 
> interfaces.
> 
> 
> Nov 10 04:45:38 gw-4 kernel: TE410P: Double/missed interrupt detected
> Nov 10 05:11:08 gw-4 kernel: Tried to load 00000000 into 00000004, but got 
> 00000001 instead
> Nov 10 05:20:33 gw-4 kernel: Tried to load 00000000 into 00000004, but got 
> 00000001 instead
> Nov 10 05:39:18 gw-4 kernel: Tried to load 00000000 into 00000004, but got 
> 00000002 instead
> Nov 10 06:00:48 gw-4 kernel: TE410P: Double/missed interrupt detected
> 
> Although /proc/interrupts doesn't show any errors or misses.
> 
> - -- 
> Regards,
> Tais M. Hansen
> ComX Networks
> Tel: +45-70257474
> Fax: +45-70257374
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.3 (GNU/Linux)
> 
> iD8DBQE/r51T2TEAILET3McRAq7lAJ9pNcRKmuHvLaThDnJbAcvBnVmlGwCfcagz
> H+tXG5nXnYDJhzlhq6tcdRw=
> =nbKx
> -----END PGP SIGNATURE-----
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Go to http://www.digium.com/index.php?menu=documentation and look at
the "Unofficial Links" section.  This section has links to a wide
variety of 3rd party Asterisk related pages.  My page is the
"Asterisk Resource Pages".

BTEL Consulting 504-899-1387 or 850-484-4545 or 877-677-9643




More information about the asterisk-users mailing list