[Asterisk-Users] Asterisk timing

[Tais M. Hansen]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Monday 10 November 2003 14:37, WipeOut wrote:
> >So if you only have smp systems with ohci and no zaptel cards (because
> > it's a sip/iax2 gateway) then you're screwed?
> Pretty much..
> Or you can spend the $100 and get an X100P to get zaptel timing and
> support Digium at the same time..

No free slots in our sip/iax2 gateways.

I now have an E100P, an (possibly defective) E400P and two TE410P cards. Only 
the E100P works flawlessly. The E400P doesn't work with the newest zaptel 
driver and the one TE410P card I've tested apparently has some serious IRQ 
issues as shown below.

Also, try explaining a manager that we've purchased for more than $5000 worth 
of interfaces of which only 1/4 works... then tell him you need more 
interfaces.


Nov 10 04:45:38 gw-4 kernel: TE410P: Double/missed interrupt detected
Nov 10 05:11:08 gw-4 kernel: Tried to load 00000000 into 00000004, but got 
00000001 instead
Nov 10 05:20:33 gw-4 kernel: Tried to load 00000000 into 00000004, but got 
00000001 instead
Nov 10 05:39:18 gw-4 kernel: Tried to load 00000000 into 00000004, but got 
00000002 instead
Nov 10 06:00:48 gw-4 kernel: TE410P: Double/missed interrupt detected

Although /proc/interrupts doesn't show any errors or misses.

- -- 
Regards,
Tais M. Hansen
ComX Networks
Tel: +45-70257474
Fax: +45-70257374
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQE/r51T2TEAILET3McRAq7lAJ9pNcRKmuHvLaThDnJbAcvBnVmlGwCfcagz
H+tXG5nXnYDJhzlhq6tcdRw=
=nbKx
-----END PGP SIGNATURE-----