[Asterisk-Users] Strange Issue with connected TA 750

[Bisker, Scott (7805)]

Okay, I upgraded the firmware to the newest release, and connected alligator
clips to the contacts on my cable.  I still get the same problem.  Any ideas
on this?

Thanks,

-sb

-----Original Message-----
From: Jon Pounder [mailto:JonP at inline.net]
Sent: Thursday, May 29, 2003 7:30 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Strange Issue with connected TA 750


you sure you don't have a multiplying block (I use the nordx stuff but I am 
sure there is an equivalent on every manufacturer's stuff)

did this once accidentally, and was so pissed when I realized the problem, 
I made sure that block would never get used again.

I check the product id every time now before I punch down anything.


At 06:58 PM 5/29/2003 -0400, you wrote:
>Hello All,
>
>I'm having a weird problem when connecting up to a TA 750 from adtran.  The
>problem I'm seeing is that the third wire on my 66 block is behaving as the
>tip (or ring) for every extension.  Is this indicative of a bad BCU?  The
>only extension that works properly is extension Zap 2.   Every other
>extension is crossed with Zap 2.  Very weird.
>
>Anyone see this before?  Did I get a bum BCU?  Also, when performing a ring
>test from the admin port of the 750, the same behavior is present.
>
>Any ideas on this one?
>
>Thanks in advance.
>
>Scott Bisker
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users