[Asterisk-Users] A Major Problem!

Surajee Ratnayake surajee at infotechs.lk
Fri May 30 06:23:16 MST 2003


yes, that solves the problem, thank you very much,
but my other problem remains, will this be a problem when it comes to E1
lines?
i am very sorry for keep on asking this

----- Original Message -----
From: "Surajee Ratnayake" <surajee at infotechs.lk>
To: <asterisk-users at lists.digium.com>
Sent: Friday, May 30, 2003 7:04 PM
Subject: Re: [Asterisk-Users] A Major Problem!


> no, we dont have a "busydetect=yes" line in the zapata.conf, we will put
it
> and giv it a try,
> btw, what will be the case with an E1 line, will the same problem occur?
>
> Surajee
>
> ----- Original Message -----
> From: "Michael Bielicki" <Michael.Bielicki at Global-Gateway.net>
> To: <asterisk-users at lists.digium.com>
> Sent: Friday, May 30, 2003 6:51 PM
> Subject: Re: [Asterisk-Users] A Major Problem!
>
>
> > Do you have busydetect set to yes in zapata,.comf ? uou need that for
> analog
> > lines and you cannot have that for E1 lines :)
> >
> > regards
> >
> > Michael Bielicki
> >
> > On Friday 30 May 2003 1:38 pm, Surajee Ratnayake wrote:
> > > hi,
> > >
> > > we are experiecing the following probem, if anybody have come across
> such a
> > > problem or a solution to this please let us know. our set up is, an
> > > Asterisk server equipped with, 4 port station interface card ,single
> port
> > > fxo card and several soft sip phones we have found problems with the
> > > following scenarios,
> > >
> > > outside caller (calling through fxo interface)
> > > <------------------------------>  sip phone/ station interface phone
> > >
> > >
> calls
> > > to a conference outside caller (calling through fxo
> > > interface)<--------------------------------------------------->
> confernce
> > >
> > > the problem is, once the outside caller(calling through fxo interface)
> > > disconnects the line, Asterisk does not detects the disconnection,
other
> > > party can hear the 'engage like tone' coming from the other side.This
> > > continues till the other party(probalby the sip phone or the station
> > > interface phone) hangs up. If the fxo user was in a conference if he
> > > disconnets the line, other confencees can here the 'engage like tone'
,
> > > this is very disturbing. The biggest problem is, the fxo line remains
> busy,
> > > till the sip/station phone user disconnects the line. Can anybody give
> us a
> > > solution for this.
> > >
> > > In the near future, we are going to add some E1 lines too(with E400P
> > > cards), once this is done, will the above call disconnection problem
> occur
> > > in that configuration too..or is this a common problem only with
analog
> ?
> > >
> > > Thank you very much,
> > > Surajee
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>




More information about the asterisk-users mailing list