[Asterisk-Users] A Major Problem!

[Surajee Ratnayake]

no, we dont have a "busydetect=yes" line in the zapata.conf, we will put it
and giv it a try,
btw, what will be the case with an E1 line, will the same problem occur?

Surajee

----- Original Message -----
From: "Michael Bielicki" <Michael.Bielicki at Global-Gateway.net>
To: <asterisk-users at lists.digium.com>
Sent: Friday, May 30, 2003 6:51 PM
Subject: Re: [Asterisk-Users] A Major Problem!


> Do you have busydetect set to yes in zapata,.comf ? uou need that for
analog
> lines and you cannot have that for E1 lines :)
>
> regards
>
> Michael Bielicki
>
> On Friday 30 May 2003 1:38 pm, Surajee Ratnayake wrote:
> > hi,
> >
> > we are experiecing the following probem, if anybody have come across
such a
> > problem or a solution to this please let us know. our set up is, an
> > Asterisk server equipped with, 4 port station interface card ,single
port
> > fxo card and several soft sip phones we have found problems with the
> > following scenarios,
> >
> > outside caller (calling through fxo interface)
> > <------------------------------>  sip phone/ station interface phone
> >
> >
calls
> > to a conference outside caller (calling through fxo
> > interface)<--------------------------------------------------->
confernce
> >
> > the problem is, once the outside caller(calling through fxo interface)
> > disconnects the line, Asterisk does not detects the disconnection, other
> > party can hear the 'engage like tone' coming from the other side.This
> > continues till the other party(probalby the sip phone or the station
> > interface phone) hangs up. If the fxo user was in a conference if he
> > disconnets the line, other confencees can here the 'engage like tone' ,
> > this is very disturbing. The biggest problem is, the fxo line remains
busy,
> > till the sip/station phone user disconnects the line. Can anybody give
us a
> > solution for this.
> >
> > In the near future, we are going to add some E1 lines too(with E400P
> > cards), once this is done, will the above call disconnection problem
occur
> > in that configuration too..or is this a common problem only with analog
?
> >
> > Thank you very much,
> > Surajee
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>