[Asterisk-Users] Strange Issue with connected TA 750

[Jon Pounder]

you sure you don't have a multiplying block (I use the nordx stuff but I am 
sure there is an equivalent on every manufacturer's stuff)

did this once accidentally, and was so pissed when I realized the problem, 
I made sure that block would never get used again.

I check the product id every time now before I punch down anything.


At 06:58 PM 5/29/2003 -0400, you wrote:
>Hello All,
>
>I'm having a weird problem when connecting up to a TA 750 from adtran.  The
>problem I'm seeing is that the third wire on my 66 block is behaving as the
>tip (or ring) for every extension.  Is this indicative of a bad BCU?  The
>only extension that works properly is extension Zap 2.   Every other
>extension is crossed with Zap 2.  Very weird.
>
>Anyone see this before?  Did I get a bum BCU?  Also, when performing a ring
>test from the admin port of the 750, the same behavior is present.
>
>Any ideas on this one?
>
>Thanks in advance.
>
>Scott Bisker
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users