[Asterisk-Users] Unable to create channel of type 'Zap'

[Martin Pycko]

So now that I finally relize that you're using T1 or E1 circuit ....
Do you have a ISDN PRI or an analog ciruit ?
What's the status of the span in zttool or in (/proc/zaptel/1).
Is it OK, RED, YELLOW ?

Martin



On Thu, 29 May 2003, Eduardo Goncalves wrote:

> On Thu, 29 May 2003 14:32:37 -0500 (CDT)
> Martin Pycko <martinp at digium.com> wrote:
>
> > Check whether "strace -xx cat /dev/zap/1" gives you any output....
> > If it stops and waits than your board is not taking interrupts.
> > Is the board running on the separate IRQ ?(/proc/interrupts)
> >
> > Martin
>
> The command "strace -xx cat /dev/zap/1" didn't stop
> here my /proc/interrupts
> asterisk:~# cat /proc/interrupts
>            CPU0
>   0:     114109          XT-PIC  timer
>   1:          2          XT-PIC  keyboard
>   2:          0          XT-PIC  cascade
>   3:    1083355          XT-PIC  tor2
>  11:         59          XT-PIC  cmpci
>  12:       7962          XT-PIC  eth0
>  14:       2495          XT-PIC  ide0
> NMI:          0
> LOC:     114078
> ERR:          0
>
> thanks
> Eduardo
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>