[Asterisk-Users] Unable to create channel of type 'Zap'

[Eduardo Goncalves]

On Thu, 29 May 2003 14:32:37 -0500 (CDT)
Martin Pycko <martinp at digium.com> wrote:

> Check whether "strace -xx cat /dev/zap/1" gives you any output....
> If it stops and waits than your board is not taking interrupts.
> Is the board running on the separate IRQ ?(/proc/interrupts)
> 
> Martin

The command "strace -xx cat /dev/zap/1" didn't stop
here my /proc/interrupts
asterisk:~# cat /proc/interrupts 
           CPU0       
  0:     114109          XT-PIC  timer
  1:          2          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:    1083355          XT-PIC  tor2
 11:         59          XT-PIC  cmpci
 12:       7962          XT-PIC  eth0
 14:       2495          XT-PIC  ide0
NMI:          0 
LOC:     114078 
ERR:          0

thanks
Eduardo