[Asterisk-Users] Disconnect options for X100P card

[Martin Pycko]

Check if you can enable "remote disconnection supervision" with your PBX.
If not you may try using the software detection when you specify

callprogress=yes
or
busydetect=yes

before the definition of your channel in zapata.conf

Martin

On Wed, 28 May 2003, Manuel Marin Garcia wrote:

> 	Asterisk is running with a X100P card. When I connect a CO line to the
> X100P card, the busy tone is detected and * disconnect the channel without
> any problem. The disconnection problem occurs when instead of a CO line I
> connect an analog extension from a Meridian Option 11 PBX. When The caller
> hang-up, the X100P only receives a Dial tone no a busy tone. I would like to
> know if there is an option to configure X100P in order that after receiving
> a Dial tone for a specific period of time automatically disconnect the
> channel.
>
> Thanks
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>