[Asterisk-Users] MGCP Transfer problems

[Jamie Carl]

*This message was transferred with a trial version of CommuniGate(tm) Pro*
I lied.  It was actually because I was using both ports on the DG102s to
test this.  Seems like a bug in the DG102s.  So this is for those out
there that have one.  

I called from a SIP client, to the MGCP extension, then transfered it to
a Zaptel channel.  Works great.

Calling from one MGCP extension to another on the same DG102s, screws
the thing up and it requires a cold restart.

Regards,

Jamie Carl
Email:	me at jazz-inc.net
PH:		+61-414-365-466

-----Original Message-----
From: Jamie Carl [mailto:me at jazz-inc.net]
Sent: Sunday, 25 May 2003 2:21 AM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] MGCP Transfer problems


*This message was transferred with a trial version of CommuniGate(tm)
Pro*
*This message was transferred with a trial version of CommuniGate(tm)
Pro*
Fixed it..  You were helpful too.  I tried using 'mgcp debug' and it
turns out my Dlink DG102s was rejecting the call on the subchannel with
a 403 response which is some type of coding error.  So I put
'disallow=all' and 'allow=ulaw' in my mgcp.conf file and voila.

Don't know why it was giving the 403 response.  Too tired to care.  It's
2:20am, it works and i'm goin to bed.

Thanx..

Regards,

Jamie Carl
Email:	me at jazz-inc.net
PH:		+61-414-365-466

-----Original Message-----
From: Karl Putland [mailto:karl at putland.linux-site.net]
Sent: Sunday, 25 May 2003 2:00 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] MGCP Transfer problems


*This message was transferred with a trial version of CommuniGate(tm)
Pro*
On Sat, 2003-05-24 at 09:47, Jamie Carl wrote:
> *This message was transferred with a trial version of CommuniGate(tm)
Pro*
> 
> Hey all,
> 
> I had this working but now I don't know what I've done to foul it up.
> I've been up all nite trying to figure it out and can't see what I've
> changed.
> 
> Anywayz, I'm trying to transfer a call using hook-flash.  Mainly so I
> get MOH when transfering and also to announce the call.  I've got:
> 
> threewaycalling = yes
> transfer = yes
> 
> in my mgcp.conf file.  It worked for me once, but now when I
hook-flash
> on phone (A), I get MOH on the phone (B), but phone (A) gives a short
> low tone beep, then a short high one. ie, no dialtone.  And then it
does
> it each time I press a button on the phone.  I can hook-flash back to
> the conversation no problems.
> 
> What am I missing here?
> 

First you need to tell us what hardware you're using.
Second, have you tried the transfer with mgcp debug turned on?

--Karl

> Regards,
> 
> Jamie Carl
> Email:	me at jazz-inc.net
> PH:		+61-414-365-466
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Karl Putland <karl at putland.linux-site.net>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users