[Asterisk-Users] RE: Help with H.323

[Dan]

Hi,

I have channel oh323 and there is no place in oh323.conf to enter something
like you say (type=user in h323.conf called [100] with host=<valid ip
address>

More, I have no gatekeeper for H.323, just the gateway included in the H.323
channel.

I think that I need another solution.

Thank you,
Dan

----- Original Message -----
From: "Wade Weppler" <weppler at wwworks-inc.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, May 23, 2003 5:17 PM
Subject: [Asterisk-Users] RE: Help with H.323


>
> > I can call the SIP phone from NM, but not reverse.
> > How can I register a H.323 client without using a gatekeeper, in order
to
> > be
> > able to define an extension for him?
>
> I spoke with Jeremy about this, and here's what I found by testing:
>
> I've setup a type=user in h323.conf called [100] with host=<valid ip
> address>
>
> If I use:
>
> exten => 100,1,Dial,H323/100
>
> The call doesn't go through.
>
> If I use:
>
> exten => 100,1,Dial,H323/100@<valid ip address>
>
> It works fine.  According to Jeremy, chan_h323 first tries to resolve an
> address through the gatekeeper.  If a gatekeeper isn't found (or used), it
> can't resolve the name (100) to an IP address.  I suggested looking at the
> IP in h323.conf if a gatekeeper isn't used.
>
> I'm not sure if Jeremy will take this any further or not, especially after
> the last couple days of flame war.
>
> -wade
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>