[Asterisk-Users] libpri and zap lib

[Mark Spencer]

Have you considered using the Asterisk API?  It will almost certainly be
much easier to develop your application rapidly using it.

Mark

On Thu, 22 May 2003, Wu Jiang wrote:

> Hello all,
>
> I have some questions about the libpri and zap lib. I've sent mail to Mark for help. Also I wonder whether anyone else would be interested and helpful in them.
>
> I'm going to migrate a program to Wildcard E400P card. Our original program is based on C API similar to the functions provided in libpri.h and zap.h, so I want to use the E400P card in the following way:
> 1. install and make zapata, zaptel, libpri
> 2. load the modules:
>     modprobe zaptel
>     modprobe tor2
> 3. edit the /etc/zaptel.conf, the run zaptel/ztcfg to configure the modules
> 4. run my program
>
> My program will do the followings:
> 1. open D-channel /dev/zap/16 , /dev/zap/48 and run pri routine on it:
>     dfd1 = open("/dev/zap/16", O_RDWR);
>     dfd2 = open("/dev/zap/48", O_RDWR);
>     pri1 = pri_new(dfd1, node, swtype);
>     pri2 = pri_new(dfd2, node, swtype);
>     /* check and handle the ISDN events on pri1, pri2 as shown in pritest.c*/
> 2.detect DTMF, play audio file, bridge channels, disconnect channels with zap functions:
>     zap_getdtmf();        /* check DTMF*/
>     zap_playf();          /* play audio file*/
>     zap_conf();           /* bridge 2 channels*/
>     zap_clearlinks();     /* disconnect bridged channels*/
>
> Is the above a feasible way?
>
> In the Asterisk code,  the /dev/zap/channel is used for all ISDN D-channels. I haven't understood it clearly. Could you please explain its usage?
>
> Thanks a lot,
>
> James
>
> ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÀ²×«ŠÉÿRÇ«²f¢–)à–+-Ë^®+$ýK
®ÏåŠËlýØ Šéÿr‰¡¶Úÿÿùb²Ûÿv("ºoÜ¢oæj)fjåŠËbú?jË^®+$þë

>